Dennis Horace Mack - Commercial Pilot, Mechanic, Flight Engineer, Remote Pilot

Dennis Mack is an FAA-certified pilot, remote pilot, aircraft mechanic, and flight engineer based in Indian Trail, NC. Dennis Horace Mack holds a Commercial Pilot certificate with Airplane Single-Engine Land (ASEL), Airplane Multi-Engine Land (AMEL), and Instrument Airplane ratings. A Commercial Pilot certificate authorizes the holder to fly aircraft for compensation or hire, including charter flights, aerial photography, banner towing, cargo operations, and other commercial aviation activities. Commercial certification requires a minimum of 250 hours of flight time. Dennis holds a Remote Pilot certificate with Small Unmanned Aircraft Systems (sUAS) rating. A Remote Pilot certificate under 14 CFR Part 107 authorizes the holder to operate small unmanned aircraft systems (drones) weighing less than 55 pounds for commercial purposes, including aerial photography, surveying, inspections, and other professional applications. Dennis holds an Airframe and Powerplant (A&P) mechanic certificate. An A&P certificate is the most comprehensive FAA mechanic certification, authorizing the holder to inspect, maintain, and repair both aircraft structures (fuselage, wings, control surfaces, landing gear) and engines (reciprocating, turbine, and turboprop powerplants). A&P mechanics are qualified to perform the broadest range of aircraft maintenance, including annual inspections when combined with an Inspection Authorization (IA). Dennis holds a Flight Engineer certificate with Turbojet rating. This certificate authorizes the holder to serve as a flight engineer on aircraft that require a flight engineer as part of the flight crew. Their most recent FAA medical certificate is a Second Class medical, valid through September 2026. The FAA airman records for Dennis Mack are tracked and verified by AviatorDB.