N396US

Unknown
None

Boeing 737-3B7 S/N: 23318

Accident Details

Date
Saturday, August 5, 1995
NTSB Number
MIA95IA194
Location
CHARLOTTE, NC
Event ID
20001207X04317
Coordinates
35.230491, -80.910720
Aircraft Damage
Unknown
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
83
Total Aboard
83

Probable Cause and Findings

IMPROPER INSTALLATION OF THE 'A' SYSTEM FLIGHT CONTROL COMPUTER BY COMPANY MAINTENANCE PERSONNEL, WHICH RESULTED IN PIN CONNECTOR(S) BEING PUSHED LOOSE AND SUBSEQUENT MALFUNCTION OF THE AUTOPILOT.

Aircraft Information

Registration
N396US
Make
BOEING
Serial Number
23318
Year Built
1986
Model / ICAO
737-3B7

Registered Owner (Historical)

Name
WELLS FARGO BANK NORTHWEST NA TRUSTEE
Address
299 S MAIN ST 12TH FL
MAC U1228-120
Status
Deregistered
City
SALT LAKE CITY
State / Zip Code
UT 84111
Country
United States

Analysis

On August 5, 1995, about 1000 eastern daylight time, a Boeing 737-3B7, N396US, operated by USAir, Inc., as flight 7, a 14 CFR Part 121 domestic passenger flight from Albany, New York, to Charlotte, North Carolina, had an uncommanded roll to the left while descending to land at Charlotte. Visual meteorological conditions prevailed at the time and an instrument flight rules flight plan was filed. The aircraft was not damaged and the airline transport-rated pilot, first officer, 3 flight attendants, and 78 passengers were not injured. The flight originated from Albany, New York, on August 5, 1995, about 0833.

The captain stated that during descent through 12,000 feet at 250 knots airspeed, the "A" autopilot system was on LNAV and level change. The aircraft shuttered and then rolled to the left to a 30-degree bank angle. He disengaged the autopilot and rolled the aircraft level. The flight was continued with the autopilot off.

Postincident investigation revealed the "LO" side of the roll sensor excitation from the "A" autopilot system flight control computer (FCC) to the "A" aileron autopilot actuator LVDT and "A" airleron postion sensor was intermittently open due to a socket pushed out of the locked position in the connector. Intermittent contact of this socket with its pin in the connector could cause airplane roll oscillations. The "A" system FCC had been removed and reinstalled the day before the incident to inspect the connectors for contamination. See attached Boeing Commercial Airplane Company report.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# MIA95IA194