N4825J

Substantial
None

Beech 95-C55 S/N: TE417

Accident Details

Date
Wednesday, February 21, 1996
NTSB Number
FTW96LA123
Location
DALLAS, TX
Event ID
20001208X05252
Coordinates
32.810543, -96.880691
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

failure of the pilot to use a more favorable runway, and his failure to go-around, when he realized the airplane would not touch down at the proper touchdown point. Factors relating to the accident were: the inoperative flap motor, failure of the pilot to obtain proper wind information, the tailwind, and failure of the pilot to attain the proper touchdown point during the landing.

Aircraft Information

Registration
N4825J
Make
BEECH
Serial Number
TE417
Engine Type
Reciprocating
Year Built
1967
Model / ICAO
95-C55 BE55
Aircraft Type
Fixed Wing Multi Engine
No. of Engines
2

Registered Owner (Historical)

Name
SALE REPORTED
Address
NONE
Status
Deregistered
City
XXX
State / Zip Code
OK 73125
Country
United States

Analysis

On February 21, 1996, at 0255 central standard time, a Beech 95-C55, N4825J, registered to a private owner and operated by Executive Flight Inc., as a Title 14 CFR Part 135 flight, sustained substantial damage during landing at Redbird Airport, Dallas, Texas. Visual meteorological conditions prevailed and an instrument flight plan was filed. Both commercial pilots were not injured. The business flight originated at Amarillo, Texas, about 3 hours and 45 minutes before the accident.

The pilot reported in the Pilot/Operator Report (NTSB Form 6120.1/2) that he was unable to extend the flaps. The pilot further reported that the airplane "touched down approximately one third of the way down runway 35 (3801 feet available) with a high ground speed." He attempted to stop the airplane in the remaining distance. In an attempt to avoid an overrun of the end of the runway, the pilot attempted to turn right onto a taxiway at the end of the runway. The airplane skidded to the left, the landing gear collapsed, and the airplane exited the end of the runway into the grass. The pilot stated that "we realized a tailwind of 10-15 knots was blowing when we got out of the aircraft."

Examination of the accident site and airplane by the FAA inspector revealed that the runway had skid marks which followed the path of the airplane for approximately 280 feet. The left landing gear had collapsed inward, and the right landing gear had collapsed outward during the attempted right turn onto the taxiway. Both of the main tires had large flat spots on them. The landing gear was damaged, both propellers were bent, and both wings and fuselage were damaged.

The flap motor had not been damaged as a result of the accident. It was tested at Air Salvage of Dallas, and it was found to be inoperative.

Although runway 35 was in use at the time, a longer runway (runway 31 with 6451 feet useable) was available for use.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# FTW96LA123