N525V

Substantial
None

WILLIAMS VELOCITY 173RG S/N: DMO-248

Accident Details

Date
Monday, June 24, 1996
NTSB Number
FTW96LA273
Location
LONGMONT, CO
Event ID
20001208X05990
Coordinates
40.170047, -105.109809
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

the pilot's improper planning/decision. Factors relating to the accident were: the high density altitude, and the pilot's inadequate weather evaluation.

Aircraft Information

Registration
N525V
Make
WILLIAMS
Serial Number
DMO-248
Model / ICAO
VELOCITY 173RG

Registered Owner (Historical)

Name
RICHARDS WILLIAM A
Address
3435 S A1A
Status
Deregistered
City
MELBOURNE BEACH
State / Zip Code
FL 32951
Country
United States

Analysis

On June 24, 1996, at 0930 mountain daylight time, an experimental home built Williams Velocity 173RG, N525V, registered to a private owner, exited the end of runway 29 onto soft ground during the takeoff roll at the Vance Brand Airport, Longmont, Colorado. The private pilot and the one passenger were not injured and the aircraft sustained substantial damage. The flight was operating under Title 14 CFR Part 91 when the accident occurred and no flight plan was filed. Visual meteorological conditions prevailed for this personal flight which was departing to Melbourne Beach, Florida, with the first en route stop planned at Salina, Kansas.

According to the pilot, he was aware of the density altitude (7,500 feet) but said he had experienced no problems on takeoff from Hattiesburg, Mississippi, or Wichita Falls, Texas, on the trip to Colorado, from Florida, so he expected none on takeoff from Longmont. (Hattiesburg is 151 feet above sea level and Wichita Falls is 1,005 feet above sea level.)

According to the Koch chart on altitude performance, given the conditions present at takeoff, the pilot would experience a takeoff run 130 percent longer than at sea level and climb performance would be degraded by 63 percent.

No empirical data was provided by the manufacture of the kit airplane to assist the pilot in calculating takeoff and climb performance under non-standard conditions. The FAA currently does not require kit manufacturers to develop and distribute such information.

The pilot stated that he was aware of density altitude and purposely had less than full fuel tanks on takeoff due to the high elevation of the airport. He reported that in the future he intended to confine his flying to airports 3,000 feet above mean sea level or less.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# FTW96LA273