N8077M

Substantial
None

Beech A36 S/N: E2565

Accident Details

Date
Saturday, November 9, 1996
NTSB Number
MIA97LA019
Location
WALNUT COVE, NC
Event ID
20001208X07090
Coordinates
36.289501, -80.129486
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

failure of the pilot/owner (PIC) to either go around while there was sufficient runway remaining or apply adequate braking to stop the aircraft before overrunning the runway. Factors relating to the accident were: the pilot/owner's misjudgment of distance and speed, his failure to attain the proper touchdown point, the check airman's failure to properly supervise the pilot/owner, and the proximity of the ditch to the runway.

Aircraft Information

Registration
Make
BEECH
Serial Number
E2565
Engine Type
Reciprocating
Year Built
1990
Model / ICAO
A36 BE36
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
6
FAA Model
A36

Registered Owner (Current)

Name
KRIESSLER SCOTT C
Address
4351 E HARBORS EDGE DR
City
PORT CLINTON
State / Zip Code
OH 43452-8973
Country
United States

Analysis

On November 9, 1996, about 0920 eastern standard time, a Beech A-36, N8077M, registered to an individual, overran the runway and collided with a ditch at Meadow Brook Field, Walnut Cove, North Carolina, while on a Title 14 CFR Part 91 instructional flight. Visual meteorological conditions prevailed at the time and an instrument flight rules flight plan was filed. The aircraft received substantial damage and the commercial-rated pilot-in-command and airline transport-rated check pilot were not injured. The flight originated from Winston Salem, North Carolina, the same day, about 0840.

The pilot-in-command stated he owned the aircraft. He was participating in the American Bonanza Society's Pilot Proficiency Program. He was receiving instruction from an American Bonanza Society certified flight instructor as part of the program. He filed an instrument flight rules flight plan, using his name, from Winston Salem to Walnut Cove.

Upon arrival at Walnut Cove, they performed the VOR/DME approach to runway 34. About 1 mile from the runway the instructor told him to remove the foggles and land the airplane. He located the runway and determined they were too high to land. He made a left circling approach and while abeam the approach end of the runway the flight instructor simulated an engine failure. They crossed the runway threshold at 20 feet and 100 knots airspeed. The aircraft did not slow well and seemed to float excessively. They touched down about midfield and he applied the brakes with moderate force, attempting not to skid. The aircraft did not slow as he expected and the instructor applied full braking. The right wheel skidded and the aircraft veered to the right and went off the runway. They collided with a ditch where the aircraft came to rest.

The flight instructor stated that before departure he "had a specific discussion concerning pilot-in-command. Dr. Tomares agreed that he would be pilot-in-command since it was his aircraft and under his control." After the simulated engine failure at Walnut Cove, the pilot-in-command was flying the aircraft and they crossed the threshold at about 90 knots. They touched down about midfield at 65 to 70 knots. The pilot-in-command began light braking. When he, the flight instructor, realized the pilot was not applying firm braking, the pilot increased his braking intensity, but it was too late to stop the aircraft on the runway. Toward the end of the runway the right main wheel stopped rotating and the aircraft veered to the right as it went off the runway into the drainage ditch.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# MIA97LA019