N9533J

Substantial
None

PIPER PA-28-180 S/N: 28-3683

Accident Details

Date
Thursday, August 19, 1993
NTSB Number
LAX93LA330
Location
SHOWLOW, AZ
Event ID
20001211X13181
Coordinates
34.229686, -110.069427
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

A total loss of engine power due to a separation of the mixture control balljoint assembly at the carburetor mixture arm and subsequent forced landing.

Aircraft Information

Registration
Make
PIPER
Serial Number
28-3683
Engine Type
Reciprocating
Year Built
1966
Model / ICAO
PA-28-180 P28A
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
4
FAA Model
PA-28-180

Registered Owner (Current)

Name
WADEL RONALD A
Address
14988 BURNT MILL RD
City
SHIPPENSBURG
State / Zip Code
PA 17257-9109
Country
United States

Analysis

On August 19, 1993, about 0630 hours mountain standard time, a Piper PA-28-180, N9533J, crashed during a forced landing about 24 miles northeast of Showlow, Arizona. The airplane was being operated as a visual flight rules (VFR) cross country instructional flight to Tucumcari, New Mexico, when the accident occurred. The airplane, co-owned and operated by the pilot, received substantial damage. The certificated commercial pilot/certified flight instructor (first pilot) and a non-certified student pilot (second pilot) were not injured. Visual meteorological conditions prevailed. A VFR flight plan was filed. The flight originated at Payson, Arizona, at 0510 hours.

The first pilot reported that while in cruise flight at 11,500 feet mean sea level the engine suddenly began to run rough and then quit. The pilot adjusted the mixture control in an attempt to restart the engine; however, movement of the control did not produce any results. The second pilot, who was initially flying the airplane, selected a clear area of high desert terrain for a forced landing. Just before touchdown, the first pilot took the controls and completed the landing. During the landing roll, the airplane collided with large bushes and high vegetation and received damage to the nose, landing gear, and wings.

Mr. John Eller, Airworthiness Inspector, Federal Aviation Administration, Scottsdale Flight Standards District Office, examined the mixture control cable. He reported that the balljoint assembly that attaches the control cable to the mixture control arm on the carburetor had separated. The assembly, part number 31747.00, was not recovered.

The airplane and engine had accumulated a total time in service of 2,545.60 flight hours. Examination of the maintenance records revealed that the most recent annual inspection was accomplished on August 6, 1993, 10 flight hours before the accident. The engine had accrued 420.5 hours of operation since being overhauled.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# LAX93LA330