Accident Details
Probable Cause and Findings
the failure of the airplane's throttle cable fitting due to undetermined reasons, which prevented the pilot from applying power above engine idle. A factor in this accident was the lack of suitable terrain for the pilot to complete a forced landing without damaging the airplane.
Aircraft Information
Registered Owner (Historical)
Analysis
On November 1, 1993, about 0849 hours eastern standard time, a Univair Ercoupe 415E, N94440 collided with objects at the termination of a forced landing. The forced landing was precipitated by a loss of engine power during cruise flight. The certificated private pilot was not injured and the airplane sustained substantial damage. The personal flight, being operated by the pilot/owner, originated in Blacksburg, Virginia and was destined for Apalachicola, Florida. Visual meteorological conditions prevailed and a flight plan was not filed.
An FAA safety inspector examined the airplane on scene and interviewed the pilot. The pilot said that when he reduced power, the throttle cable assembly became loose. He said that he could not regain power and that the power remained at idle. An examination conducted by the FAA safety inspector revealed a throttle cable assembly fitting separated from its housing which would not allow the pilot to manipulate the throttle.
In his written report, the pilot added that because of mountainous terrain, he was unable to reach suitable terrain to complete the forced landing.
Data Source
Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# BFO94LA001