N4835F

Substantial
None

Cessna TU206A S/N: U206-0535

Accident Details

Date
Sunday, August 8, 1999
NTSB Number
DEN99LA138
Location
DURANGO, CO
Event ID
20001212X19484
Coordinates
37.269668, -107.879333
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
5
Total Aboard
5

Probable Cause and Findings

A worn landing nose gear steering system that diminished the ability to steer the airplane. Factors were improper maintenance by unknown persons, and loose gravel.

Aircraft Information

Registration
Make
CESSNA
Serial Number
U206-0535
Engine Type
Reciprocating
Model / ICAO
TU206A C206
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
6
FAA Model
TU206A

Registered Owner (Current)

Name
HERNANDEZ CHRISTOPHER A
Address
6402 N 11TH DR
City
PHOENIX
State / Zip Code
AZ 85013-1387
Country
United States

Analysis

On August 7, 1999, at 2359 mountain daylight time, a Cessna TU206A, N4835F, sustained substantial damage when it departed the left side of runway 01 during landing roll at Animas Air Park, Durango, Colorado. The commercial pilot and his four passengers were not injured. Visual meteorological conditions prevailed for this personal flight operating under Title 14 CFR Part 91 and no flight plan was filed. The flight originated from Window Rock, Arizona, at 2100.

Weather at the time was clear skies with wind from 350 degrees at four knots.

According to the pilot, the aircraft had traveled a short distance following a normal touchdown on runway centerline when the aircraft pulled hard to the left and exited the left side of the runway onto a gravel covered area. He said that as the aircraft decelerated through an estimated 10 miles per hour, the nose wheel broke off.

Examination of the aircraft by a mechanic employed by Greg's Flying Service, in Durango, provided evidence that the left wing, propeller, and nose landing gear has sustained damage. The mechanic also found that one of the nose wheel steering arm roll pins was missing and a piece of safety wire was substituted, and the other roll pin and roll pin receptacles were worn beyond limits. (See attached diagram.)

According to the flying service mechanic, this would cause the nose wheel steering to be sloppy and slow to respond to pilot input.

When the nose wheel steering had work performed on it is unknown.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# DEN99LA138