N7299B

Substantial
None

Beech J-35 S/N: D-5663

Accident Details

Date
Wednesday, September 1, 1999
NTSB Number
SEA99LA169
Location
UNION, OR
Event ID
20001212X19889
Coordinates
45.149963, -117.769699
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
3
Total Aboard
3

Probable Cause and Findings

Directional control not maintained. A rough/uneven landing area was a factor.

Aircraft Information

Registration
N7299B
Make
BEECH
Serial Number
D-5663
Engine Type
Reciprocating
Year Built
1958
Model / ICAO
J-35 BE35
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
SALE REPORTED
Address
XXXX
Status
Deregistered
City
UNKNOWN
State / Zip Code
OK 73125
Country
United States

Analysis

On September 1, 1999, approximately 0900 Pacific daylight time, a Beech J-35, N7299B, registered to and operated by the pilot as a 14CFR91 personal/pleasure flight, was substantially damaged while landing at Red's Wallowa airstrip, located 15 nautical miles northeast of Union, Oregon. The commercial pilot and his two passengers were not injured. The flight originated from Walla Walla Regional Airport, Walla Walla, Washington, approximately 30 minutes prior to the accident. Visual meteorological conditions prevailed and no flight plan was filed for the cross-country flight.

In a written statement, the pilot reported that shortly after touchdown, during the landing roll, the aircraft "hit a ditch or a hole which changed our roll direction to the right into the high grass." He stated that due to high vegetation and rough terrain, he was unable to correct the situation and the aircraft traveled down a grassy slope adjacent to the runway. After encountering the rough terrain, the aircraft's nose gear separated and the forward section of the fuselage impacted the ground. The aircraft sustained substantial damage to the fuselage.

A pilot rated witness stated that the accident aircraft touched down to the right side (west) of the airstrip and proceeded down the embankment adjacent to the landing area.

The pilot reported that a mechanic, who looked at the aircraft after the accident, stated that the nose gear broke off on a weld, and it appeared that the weld was flawed.

The landing gear assembly was shipped to the National Transportation Safety Board Materials Laboratory, Washington, DC, for further examination. The specialist reported that the fractures were indicative of overstress and there was no evidence of preexisting cracks.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# SEA99LA169