N335T

HISTORY OF FLIGHT

On March 10, 2000, at 0605 central standard time, an Mbb, BO105S-CBS-5 helicopter, N335T, was destroyed when it impacted terrain while maneuvering near Dalhart, Texas. The helicopter was registered to General Electric Capital Corporation, of Englewood, Colorado, and operated by Temsco Helicopters, Inc., Ketchikan, Alaska, under contract to Northwest Texas Healthcare System Hospital (Northwest Texas Hospital), of Amarillo, Texas. The instrument rated commercial pilot, two medical crew members, and the medical patient sustained fatal injuries. Dark night instrument meteorological conditions prevailed and a company flight plan was filed for the 14 Code of Federal Regulations Part 135 air medical transport flight. The flight originated from a farm field 15 miles south of Boise City, Oklahoma, at 0600 and was destined for the Northwest Texas Hospital.

According to dispatch personnel at the Northwest Texas Hospital, the helicopter departed Northwest Texas Hospital at 0355 and was destined for a hospital in Boise City. The purpose of the flight was to transfer a patient from the hospital in Boise City to the Northwest Texas Hospital. At 0506, the pilot reported that he landed the helicopter approximately 15 miles south of the Boise City hospital along the east side of Highway 385 due to fog. He stated that he would wait for the patient to be transported to his location and then return to the Northwest Texas Hospital.

At 0557, the emergency medical technician (EMT), who was aboard the ambulance, transferred the patient to the helicopter. The EMT stated that he observed the helicopter depart to the south with all the lights on, paralleling Highway 385 approximately 30-50 feet agl. The EMT added that the visibility on the ground was 1/4 mile with a "very low ceiling," and "it seemed like [the helicopter] was trying to stay close to the ground and not get up into the heavy fog."

According to the ambulance driver, he watched the helicopter liftoff and fly southbound over the road at an altitude of 50-75 feet agl. He stated that he followed the helicopter as it paralleled the road for approximately 1.5 minutes, and it was flying in "extremely dense fog." He then turned northbound and the helicopter disappeared from his view. He added that he also observed ice forming on the ambulance's mirrors and antennas.

The Boise City Sheriff stated that he and his wife were driving north on Highway 385 and they observed the helicopter lift off of the ground with its lights on. He reported that the helicopter flew south paralleling the east side of Highway 385, approximately 10-20 feet above the ground. The Sheriff added that there was patchy fog in the area and approximately 1/4-inch of ice had formed on his vehicle's antenna while driving in the area.

There were no witnesses to the accident.

PERSONNEL INFORMATION

The FAA issued the pilot a commercial certificate on December 22, 1992. According to records provided by Temsco Helicopters Inc., the pilot was initially qualified in the BO-105 on January 29, 1998. A pilot qualification form, which was provided by Temsco Helicopters Inc., dated December 16, 1999, revealed that the pilot had accumulated a total of 3,585 flight hours, of which 3,500 hours were in helicopters, and 90 hours were in the BO-105. Additionally, the form revealed that the pilot had accumulated 44 hours of simulated instrument time and 1 hour of actual instrument time. The pilot successfully completed his most recent recurrent ground and flight training on January 6, 1999. According to the grade sheet for the flight portion of the recurrent training (FAA Form 8410-3), the pilot received a satisfactory rating for flight by reference to instruments. According to the Pilot/Operator Aircraft Accident Report (NTSB FORM 6120.1/2), which was completed by Temsco Helicopters Inc., the pilot had accumulated a total of 3,630 flight hours of which 3,580 were in rotorcraft, and 107 hours were in the BO-105. Additionally, the pilot held a second class medical certificate dated February 1, 2000.

The two medical crewmembers, a paramedic and a flight nurse, were based at the Northwest Texas Hospital.

AIRCRAFT INFORMATION

The 1994-model helicopter was powered by two 420-horsepower Allison 250-C20B turboshaft engines. The helicopter was equipped with a four-bladed main rotor system and a two-bladed tail rotor. The helicopter underwent its most recent annual inspection on January 16, 2000, and as of March 8, 2000, had accumulated a total of 565.2 hours. The engines underwent their most recent 100-hour inspections on January 16, 2000, at which time the left engine had accumulated a total of 360.7 hours, and the right engine had accumulated a total of 497.4 hours. Additionally, the helicopter was equipped for IFR operations.

METEOROLOGICAL INFORMATION

The area forecast for Oklahoma and Northwestern Texas was issued on March 10, 2000, at 0445, and was valid on March 10, 2000, until 1700. The forecast for Oklahoma (panhandle and western third) was broken to scattered clouds at 3,000 feet agl and broken clouds at 12,000 feet agl. Light rain showers and isolated thunderstorms were also forecast. The forecast for Northwestern Texas (panhandle) was for broken clouds at 12,000 feet agl, isolated rain showers, and isolated thunderstorms. There were no AIRMETs, SIGMETs, or Convective SIGMETs in effect for the time and area of the accident.

At 0551, the weather observation facility at Dalhart, Texas, (located 28 miles south of the accident site) reported scattered clouds at 10,000 feet, a broken ceiling at 20,000 feet, visibility 15 miles, wind from 350 degrees at 6 knots, temperature 36 degrees Fahrenheit, dew point 32 degrees Fahrenheit, and an altimeter setting of 29.97 inches of mercury.

At 0650, Dalhart reported scattered clouds at 15,000 feet, visibility 15 miles, wind from 330 degrees at 8 knots, temperature 32 degrees Fahrenheit, dewpoint 30 degrees Fahrenheit, and an altimeter setting of 29.98 inches of Mercury.

At 0750, Dalhart reported a ceiling of 200 feet broken and 15,000 feet overcast, visibility 1 mile in mist, wind from 360 degrees at 10 knots, temperature 32 degrees Fahrenheit, dewpoint 29 degrees Fahrenheit, altimeter 29.97 inches of mercury, and the remarks sections reported visibility higher to the south-southwest.

At 0750, Dalhart also issued a corrected report which stated that there was a broken ceiling at 100 feet and overcast cloud layer at 15,000 feet, visibility .25 miles in freezing fog and mist, wind from 360 degrees at 10 knots, temperature 32 degrees Fahrenheit, dewpoint 29 degrees Fahrenheit, altimeter setting 29.99 inches of Mercury, and the remarks section reported visibility higher to the south-southwest.

According to Geostationary Operational Environmental Satellite (GOES) 8 data, between 0545 and 0645 radiative temperatures increased in value and area, near the accident location. GOES images revealed that the temperature changed between +2 and +10 degrees Celcius. Values between +2 and +5 degrees Celcius indicate the presence of liquid stratiform clouds and fog.

According to the U.S. Naval Observatory, sunrise occurred at 0707.

WRECKAGE AND IMPACT INFORMATION

The accident site was located on the west side of Highway 385, approximately 0.8 mile southwest of the departure site. The location of the wreckage was recorded by a GPS receiver at north 036 degrees 28.37 minutes latitude and west 102 degrees 32.50 minutes longitude. The entire accident site, including ground impressions and aircraft components, encompassed an area measuring 262 feet by 75 feet. The ground at the accident site was charred and sooted. The energy path was oriented along a measured magnetic heading of 240 degrees. Ground impressions at the initial impact point were consistent with both skids and slash marks from the main rotor blades. A portion of the left skid's shoe and a main rotor blade tip weight were found embedded in the initial impact crater. The left skid shoe was embedded along a 45-degree angle relative with the ground. The main wreckage was located 240 feet southwest of the initial impact point and included the main rotor assembly, transmission, and engines. The main wreckage was consumed by fire. Between the initial impact point and the main wreckage were helicopter components, including flight control tubes, doors, cockpit instruments, and the separated tailboom and tail rotor assembly. The final helicopter component along the distribution path was a section of the tail rotor drive shaft. The cabin area and cockpit were destroyed by impact forces and fire.

Both turbine engines, the transmission, and the main rotor system remained attached to the airframe. They were damaged by impact forces and were sooted and charred. The hydraulic module was observed in the system 1 position and a fluid resembling hydraulic fluid was observed emanating from the unit.

Two of the four main rotor blades separated at the blade root. One blade's pitch change rod remained attached to the swash plate, and the blade was fragmented from its mid-point outboard to the blade tip. The second blade's pitch change rod separated at mid-span and the entire blade was fragmented and charred. The third main rotor blade's pitch change link remained attached to the swashplate, and the blade separated aft of the counterweight. The last main rotor blade's pitch change rod remained attached to the swashplate, and the blade remained secured to the main rotor head, although it was fragmented and charred.

A tailboom section that measured 12 feet, 4 inches, in length was separated just aft of the main fuselage. The tailboom was also separated aft of the stabilizer, which included the tail rotor assembly. The 90-degree gear box and tail rotor blades remained intact. Both tail rotor blades exhibited delamination at their trailing edges. The tailrotor dr...