N8331H

Substantial
None

Hallett HALLETT-1 S/N: 101

Accident Details

Date
Saturday, October 21, 2000
NTSB Number
SEA01LA009
Location
YELM, WA
Event ID
20001212X22256
Coordinates
46.870506, -122.569190
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

The pilot's failure to abort the takeoff when it became questionable as to whether the aircraft would be able to clear an object just off the departure end of the runway, and the pilot's failure to maintain clearance from the object as he attempted to continue the departure. Factors include operating with a known engine deficiency, and a power line strung just off the departure end of the runway.

Aircraft Information

Registration
N8331H
Make
HALLETT
Serial Number
101
Engine Type
Turbo-shaft
Year Built
2000
Model / ICAO
HALLETT-1 L410
Aircraft Type
Fixed Wing Multi Engine
No. of Engines
2

Registered Owner (Historical)

Name
HALLETT THOMAS E
Address
5147 E COLLINS RD
Status
Deregistered
City
PORT ORCHARD
State / Zip Code
WA 98366-8302
Country
United States

Analysis

On October 21, 2000, approximately 1345 Pacific daylight time, an experimental Hallett-1 gyroplane, N8331H, collided with a power line during takeoff from Flying "B" Airport, Yelm, Washington. The private pilot, who was the sole occupant, was not injured, but the aircraft, which was owned and operated by the pilot, sustained substantial damage. The 14 CFR Part 91 local personal pleasure flight, was being operated in visual meteorological conditions. No flight plan had been filed. The aircraft did not carry an ELT.

A video of the takeoff shows that after liftoff, the aircraft climbed at a very shallow angle. When asked about this in a post-accident telephone interview, the pilot stated that for a number of hours prior to the attempted takeoff, the gyroplane's engine had been running lean and hot, and had therefore not been producing the expected maximum power. As it reached a point where the aircraft was approximately 90 percent of the way down the runway, it still had not reached an altitude equal to the height of the marked power line off the departure end. Instead of aborting the takeoff at that point, the pilot continued the takeoff sequence and attempted to increase the gyroplanes angle of climb. According to the pilot, as he neared the departure end of the runway, it seemed to him that the engine's power output began to decay. Believing that he would not be able to clear the power line, he attempted to fly underneath it. Although he missed the marked main transmission wire, he did not see that there was a smaller unmarked wire strung further down the pole. As he maneuvered to miss the main wire, the rotor mast of the gyroplane contacted the lower wire, stopping the rotation of the main rotor. Immediately after the main rotor hit the wire, the aircraft dropped about 10 feet onto the surface of an adjacent road.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# SEA01LA009