N4598

Substantial
None

Grumman-Schweizer G-164AS/N: 1068

Accident Details

Date
Thursday, August 16, 2001
NTSB Number
CHI01LA286
Location
Petersburg, NE
Event ID
20010823X01757
Coordinates
41.849075, -98.069923
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

The failure of the engine cylinder, and the unsuitable terrain for landing encountered by the pilot. Factors were the low altitude and the muddy field.

Aircraft Information

Registration
N4598
Make
GRUMMAN-SCHWEIZER
Serial Number
1068
Engine Type
Turbo-shaft
Model / ICAO
G-164AG64T
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
PETTIS AG AVIATION LLC
Address
86 IRONTOWN CIR
Status
Deregistered
City
ROACH
State / Zip Code
MO 65787-8041
Country
United States

Analysis

On August 16, 2001, about 1615 central daylight time, a Grumman-Schweizer G-164A, piloted by a commercial pilot, sustained substantial damage during a forced landing following a loss of engine power during an aerial-application flight near Petersburg, Nebraska. The 14 CFR Part 137 flight was operating in visual meteorological conditions and was not on a flight plan. The pilot, who was the sole occupant, was not injured. The local flight originated from the Antelope County Airport, Neligh, Nebraska, about 1515.

The pilot reported, "While spraying at 6 [feet] AGL the engine began running rough and quit. I made an emergency landing in a muddy soybean field, sliding to a stop damaging the right lower wing and right landing gear."

A postaccident examination of the airplane revealed that the number 8 cylinder head had separated from the cylinder barrel between the second and third cooling fins. This condition is identified in Pratt and Whitney Airworthiness Directive (AD) 78-08-07. The AD requires a recurring visual inspection of the cylinder at 150 hour or 100 hour intervals. Cylinders that had been ultrasonically tested prior to installation on the engine were to be inspected at 150 hour intervals. Cylinders that had not been ultrasonically tested prior to installation on the engine were to be inspected at 100 hour intervals . According to the aircraft maintenance records, the airplane had accumulated 99.8 hours time in service since the inspection was last performed. It is not known if the failed cylinder had been ultrasonically inspected.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CHI01LA286