N95223

Substantial
Minor

Taylorcraft BC12-DS/N: 9623

Accident Details

Date
Sunday, September 2, 2001
NTSB Number
SEA01LA164
Location
Winston, OR
Event ID
20010906X01887
Coordinates
43.050979, -123.500518
Aircraft Damage
Substantial
Highest Injury
Minor
Fatalities
0
Serious Injuries
0
Minor Injuries
1
Uninjured
0
Total Aboard
1

Probable Cause and Findings

The pilot's failure to maintain clearance from a fence during the initial takeoff. A fence was a factor.

Aircraft Information

Registration
Make
TAYLORCRAFT
Serial Number
9623
Engine Type
Reciprocating
Year Built
1946
Model / ICAO
BC12-DTAYB
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
2
FAA Model
BC12-D

Registered Owner (Current)

Name
CONNER BRENT F
Address
2265 COKER BUTTE RD
City
MEDFORD
State / Zip Code
OR 97504-9020
Country
United States

Analysis

On September 1, 2001, about 1830 Pacific daylight time, a Taylorcraft BC12-D, N95223, registered to a private owner and operated by the pilot as a 14 CFR Part 91 personal flight, collided with a fence during takeoff from an open pasture located about seven miles southwest of Winston, OR. Visual meteorological conditions prevailed at the time and no flight plan was filed. The aircraft was substantially damaged and the private pilot, the sole occupant, received minor injuries.

During a telephone interview with the NTSB IIC, and subsequent statements to the Federal Aviation Administration inspector from the Portland, Oregon, Flight Standards District Office, the pilot reported that the flight began from Roseburg, Oregon, and was flown to a farm near Winston. The pilot reported that the aircraft had not undergone an annual inspection for about three years and he was repositioning the aircraft to this area so that "major rework" could be accomplished. The pilot over flew the farm several times to determine the wind direction then proceeded to land. While on the ground, the pilot noted that the wind was "swirling," but appeared to be blowing from the north to southwest. In order for the aircraft to be closer to his residence, the pilot got back in the aircraft to move it to another field. The pilot stated that he applied full throttle with the brakes on in preparation for a short field takeoff to the north. The pilot thought that the aircraft attained an altitude of about ten feet, about 150 feet before the fence line, when the aircraft started to steadily loose altitude. One of the main landing gear wheels caught on the fence. The aircraft continued flying but "mushed" along before colliding with another fence on the north end of the field, substantially damaging both wings and collapsing the landing gear. The pilot reported no mechanical failures or malfunctions with the aircraft at the time of the accident.

Two witnesses reported that the aircraft pulled up just before colliding with the three to four foot high fence. The aircraft continued on over the next field, subsequently colliding with the fence on the north end of the field. One witness reported that the takeoff was "going with the wind," while the other reported that the breeze was light from the south.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# SEA01LA164