N6124U

Substantial
Minor

Paige Kolb MK IIIS/N: M3-304

Accident Details

Date
Friday, September 27, 2002
NTSB Number
LAX02LA297
Location
Fresno, CA
Event ID
20021003X05267
Coordinates
36.732223, -119.819725
Aircraft Damage
Substantial
Highest Injury
Minor
Fatalities
0
Serious Injuries
0
Minor Injuries
1
Uninjured
0
Total Aboard
1

Probable Cause and Findings

the student pilot's excessive rotation and failure to obtain/maintain adequate airspeed during takeoff, resulting in a stall.

Aircraft Information

Registration
N6124U
Make
PAIGE
Serial Number
M3-304
Engine Type
Reciprocating
Year Built
2001
Model / ICAO
Kolb MK IIISBM3
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
PAIGE JAMES G
Address
2127 MONKEY RD
Status
Deregistered
City
ROCKPORT
State / Zip Code
TX 78382-7408
Country
United States

Analysis

On September 26, 2002, at 1834 Pacific daylight time, a Paige Kolb MK III experimental airplane, N6124U, collided with the runway during an attempted takeoff at the Fresno-Chandler Downtown Airport, Fresno, California. The student pilot was operating the airplane on a local personal flight under the provisions of 14 CFR Part 91. The student pilot, the sole occupant, sustained minor injuries; the airplane sustained substantial damage. Visual meteorological conditions prevailed, and a flight plan had not been filed.

During a telephone interview with the National Transportation Safety Board, a witness, who was also a Federal Aviation Administration (FAA) inspector, stated that he saw the homebuilt airplane begin a takeoff roll on runway 30R. During rotation, the airplane excessively pitched up and began a steep climb. After reaching about 25 to 50 feet above ground level, the airplane settled back to the runway, hitting the surface hard. Upon touchdown, the airplane was slightly nose high and had a forward velocity. The airplane appeared to accelerate after touchdown and continued to veer off to the left of the runway.

The FAA inspector further stated that the student pilot did not have instruction or authorization to act as pilot-in-command of the airplane. The pilot told him that he was engaged in a process of self-instruction. The pilot also revealed to him that he had performed mechanical work including the assembly of the airplane, yet he did not hold a repairman or mechanic certificate.

Despite several attempts by the Safety Board, the pilot failed to submit a NTSB Pilot/Operator Aircraft Accident Report (NTSB Form 6120.1/2).

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# LAX02LA297