Summary
On February 22, 2003, a Aerostar RX-7 (N6413N) was involved in an incident near Reno, NV. All 3 people aboard were uninjured. The aircraft sustained substantial damage.
The National Transportation Safety Board determined the probable cause of this incident to be: A sudden wind shift that forced the balloon to drift towards an obstruction, and the pilot's inability to perform an evasive maneuver in sufficient time to prevent a collision.
On February 22, 2003, at 0800 Pacific standard time, an Aerostar RX-7 balloon, N6413N, collided with power lines while maneuvering to land in a meadow northwest of Reno, Nevada. The balloon was owned and operated by the pilot under the provisions of 14 CFR Part 91. The private pilot and two passengers were not injured; the balloon sustained substantial damage. Visual meteorological conditions prevailed for the local area flight that departed from a nearby field at 0715. No flight plan had been filed.
The pilot stated that he was crossing a north-south ridgeline while approaching a landing spot in a meadow. The balloon flew over the descending slope and cleared a set of power lines that ran parallel to the ridgeline.
This incident is documented in NTSB report LAX03LA095. AviatorDB cross-references NTSB investigation data with FAA registry records to provide comprehensive safety information for aircraft N6413N.
Accident Details
Probable Cause and Findings
A sudden wind shift that forced the balloon to drift towards an obstruction, and the pilot's inability to perform an evasive maneuver in sufficient time to prevent a collision.
Aircraft Information
Registered Owner (Current)
Analysis
On February 22, 2003, at 0800 Pacific standard time, an Aerostar RX-7 balloon, N6413N, collided with power lines while maneuvering to land in a meadow northwest of Reno, Nevada. The balloon was owned and operated by the pilot under the provisions of 14 CFR Part 91. The private pilot and two passengers were not injured; the balloon sustained substantial damage. Visual meteorological conditions prevailed for the local area flight that departed from a nearby field at 0715. No flight plan had been filed.
The pilot stated that he was crossing a north-south ridgeline while approaching a landing spot in a meadow. The balloon flew over the descending slope and cleared a set of power lines that ran parallel to the ridgeline. A sudden wind shift occurred, blowing the balloon back towards the power lines. The pilot turned on the burner in an attempt to clear the power lines again, however, sufficient lift was not achieved. Realizing that a collision was inevitable, the burner and tanks were shut off and instruments disconnected. After the initial impact the balloon continued rising, and the pilot pulled the 'rip-cord' attached to the deflation port. A rapid decent followed, and the balloon came to rest directly under the power lines.
Data Source
Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# LAX03LA095