N8240P

Substantial
None

Piper PA-18-160S/N: 18-8045

Accident Details

Date
Saturday, May 3, 2003
NTSB Number
ANC03LA048
Location
Skwentna, AK
Event ID
20030508X00635
Coordinates
62.500000, -153.333328
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

The pilot's failure to use carburetor heat, which resulted in the accumulation of carburetor ice, a partial loss of engine power, and a subsequent forced landing. Factors contributing to the accident are a downdraft, the pilot operating the airplane at a low altitude, the presence of carburetor icing conditions, and the lack of suitable terrain for a forced landing.

Aircraft Information

Registration
Make
PIPER
Serial Number
18-8045
Engine Type
Reciprocating
Year Built
1963
Model / ICAO
PA-18-160PA18
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
2
FAA Model
PA-18-150

Registered Owner (Current)

Name
FORSGREN KEITH
Address
PO BOX 870529
City
WASILLA
State / Zip Code
AK 99687-0529
Country
United States

Analysis

On May 3, 2003, about 1200 Alaska daylight time, a wheel-equipped Piper PA-18-160 airplane, N8240P, sustained substantial damage when it collided with the frozen surface of a river during a forced landing following a partial loss of engine power. The accident occurred about 80 miles northwest of Skwentna, Alaska. The airline transport certificated pilot and the sole passenger were not injured. The Title 14, CFR Part 91 personal flight operated in day visual meteorological conditions without a flight plan. The flight departed from an airstrip near Wasilla, Alaska, about 1030, and the destination was the area of the accident site.

The pilot contacted the NTSB investigator-in-charge (IIC) on May 7. He related that he and a passenger were on a pleasure flight, and that he had been flying about 100 feet above the ground at a reduced power setting. He said he had initiated a 90 degree downwind turn, and hit a "sinker," which pushed the airplane towards the ground. He immediately applied full power, but the engine did not seem to respond with maximum power. The pilot indicated he did not have sufficient altitude to select a more desirable forced landing spot other than the frozen river nearby. He said he leveled the wings, and the airplane hit hard on the ice, damaging the fuselage, wings, and landing gear. When asked by the IIC if he was aware of why the engine did not seem to respond with maximum power, the pilot stated that he thought the engine had accumulated carburetor ice since he had been flying at a reduced power setting without the application of carburetor heat.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# ANC03LA048