N9921B

Substantial
Serious

Cessna 182AS/N: 34321

Accident Details

Date
Saturday, September 20, 2003
NTSB Number
LAX03LA293
Location
Georgetown, CA
Event ID
20031003X01655
Coordinates
38.921112, -120.864723
Aircraft Damage
Substantial
Highest Injury
Serious
Fatalities
0
Serious Injuries
2
Minor Injuries
0
Uninjured
0
Total Aboard
2

Probable Cause and Findings

the pilot's misjudged speed and distance, and his failure to perform a go-around which resulted in a runway overrun.

Aircraft Information

Registration
N9921B
Make
CESSNA
Serial Number
34321
Engine Type
Reciprocating
Year Built
1957
Model / ICAO
182AC182
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
EASLICK PAUL F
Address
19451 DORIS WAY
Status
Deregistered
City
SANTA ANA
State / Zip Code
CA 92705-1322
Country
United States

Analysis

On September 20, 2003, about 1440 Pacific daylight time, a Cessna 182A, N9921B, collided with trees during an aborted landing at the Georgetown Airport, Georgetown, California. The pilot/owner was operating the airplane under the provisions of 14 CFR Part 91. The private pilot and one passenger sustained serious injuries; the airplane sustained substantial damage. Visual meteorological conditions prevailed for the personal flight, and a visual flight rules flight plan had been filed. The cross-country flight originated from Fullerton Airport, Fullerton, California, about 1215, with a planned destination of Georgetown.

During a telephone interview with a National Transportation Safety Board investigator, the pilot stated that while on final approach for runway 16, he configured the airplane with the wing flaps in the fully extended position. As he approached the runway, the pilot noted that the airplane was oriented above the normal glide path, and that the airspeed was excessive. He maneuvered the airplane into a forward slip in an effort to dissipate altitude and slow the airplane to the proper approach speed, establishing a proper glide path.

The pilot further stated, that the airplane touched down hard, contacting the asphalt about halfway down the length of the runway. During the landing rollout, and upon reaching the apex of the natural upslope of the runway, the pilot was able to obtain a visual reference as to where the end of the runway was. He applied full brake pressure and the airplane skidded down the runway. Upon reaching the end of the runway, the pilot was unable to stop the airplane, and opted to execute an aborted landing by manipulating the throttle control to the full power setting. As the airplane departed the runway surface, the pilot initiated a slight left turn in an effort to avoid terrain; however, the airplane impacted trees.

The pilot reported no preimpact mechanical malfunctions or failures with the airplane.

In a written statement, an officer from the sheriff's department reported interviewing several witnesses. One witness, who was also a pilot, reported seeing the airplane touchdown far beyond the normal touchdown point with excessive speed. He observed the airplane skid down the runway continuing off the runway surface, and become momentarily airborne.

The Airport/Facility Directory, Southwest U.S., indicated that Georgetown runway 16 was 2,980 feet long, 60 feet wide. The runway slope was not given, as that information is only published for those airports with an approved Federal Aviation Administration instrument approach.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# LAX03LA293