N300SN

Substantial
None

Cessna 402CS/N: 402C0060

Accident Details

Date
Thursday, August 5, 2004
NTSB Number
ANC04CA085
Location
Huslia, AK
Event ID
20041005X01568
Coordinates
65.697502, -156.351104
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

The pilot's failure to extend the landing gear, which resulted in an inadvertent wheels up landing. A factor associated with the accident was the pilot's diverted attention.

Aircraft Information

Registration
N300SN
Make
CESSNA
Serial Number
402C0060
Engine Type
Reciprocating
Year Built
1979
Model / ICAO
402CC402
Aircraft Type
Fixed Wing Multi Engine
No. of Engines
2

Registered Owner (Historical)

Name
HYANNIS AIR SERVICE INC
Address
660 BARNSTABLE RD
Status
Deregistered
City
HYANNIS
State / Zip Code
MA 02601-1927
Country
United States

Analysis

On August 4, 2004, about 1630 Alaska daylight time, a Cessna 402C airplane, N300SN, sustained substantial damage during an inadvertent gear-up landing at the Huslia Airport, Huslia, Alaska. The airplane was being operated by Arctic Circle Air Service of Fairbanks, Alaska, as a visual flight rules (VFR) cargo flight under Title 14, CFR Part 135 when the accident occurred. The solo commercial pilot was not injured. Visual meteorological conditions prevailed, and company flight following procedures were in effect. The flight originated at the Fairbanks International Airport, Fairbanks, about 1400.

During a telephone conversation with the National Transportation Safety Board (NTSB) investigator-in-charge (IIC) on August 4, the director of operations for the operator said the pilot told him he entered the airport area intending to land on one runway, but then elected to change to the opposite end. The pilot told him that in the confusion he forgot to extend the landing gear. The director of operations said the airplane sustained damage to the bottom of the fuselage, flaps, engine nacelles, and propellers. He said prior to the accident there were no known mechanical anomalies with the airplane.

In a written statement dated August 4, the pilot reported that he entered the airport area intending to land on one runway, but elected to change to the oposite end. He wrote that he was watching a departing airplane, and had placed his hand on the landing gear handle, but forgot to extend the landing gear, and landed gear-up.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# ANC04CA085