N6639R

Substantial
None

Hughes OH-6AS/N: 66-7874

Accident Details

Date
Friday, October 15, 2004
NTSB Number
LAX05TA008
Location
Jacumba, CA
Event ID
20041104X01756
Coordinates
32.616111, -116.165000
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

the pilot's failure to maintain adequate clearance from the mountainous terrain, which resulted in the helicopter's tail rotor blades impacting rocks. A factor in the accident was the pilot's complacency.

Aircraft Information

Registration
N6639R
Make
HUGHES
Serial Number
66-7874
Model / ICAO
OH-6A

Registered Owner (Historical)

Name
USDA APHIS WS ATOC
Address
1223 N AIRPORT RD
Status
Deregistered
City
CEDAR CITY
State / Zip Code
UT 84721-8412
Country
United States

Analysis

On October 15, 2004, about 0115 Pacific daylight time, a Hughes OH-6A, N6639R, collided with terrain while performing low altitude maneuvers 4 miles west of the Jacumba Airport, Jacumba, California. The US Border Patrol Air Operations was operating the helicopter under the provisions of 14 CFR Part 91. The commercial pilot and a flight crewmember were not injured; the helicopter sustained substantial damage. The local public-use border patrol flight departed Imperial County Airport, Imperial, California, about 2215 on October 14. Visual meteorological conditions prevailed on the dark night, and a flight plan had not been filed.

In a written statement, the pilot reported that he was assisting border patrol ground units with a group of illegal aliens located about 4 miles west of Jacumba, in mountainous terrain consisting of tall weeds and thick brush. While maneuvering in the area, the other flight crewmember, an observer, indicated to the pilot that she thought she saw movement in some bushes located behind the helicopter. The pilot maneuvered the helicopter in a turning descent in an effort to provide the observer with a better view of the area. Thinking that the helicopter's tail rotor would be clear of terrain, the pilot maneuvered around the brush. As he turned the helicopter, he heard a loud bang, followed by a vibration, at which point he opted to land.

The pilot further stated that after egressing, he completed an inspection of the helicopter. During the examination he discovered that approximately 3 inches of each tail rotor blade were missing; he did not find any other damage. He reported that 3 days after the accident, while inspecting the accident scene, he found red and white paint transfers on a rock, located about 100 yards uphill from the landing site; he noted that the tail rotor blades were painted red and white.

During a telephone conversation with a National Transportation Safety Board investigator, the pilot stated that the accident flight was the last flight of his 6-day workweek. He thought that his complacency and eagerness to finish the flight might have contributed to him misjudging the maneuver. He reported no mechanical malfunctions or failures with the helicopter prior to impact.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# LAX05TA008