N6626K

Substantial
None

Grumman-Schweizer G-164CS/N: 8C

Accident Details

Date
Friday, July 1, 2005
NTSB Number
DFW05CA177
Location
Gillett, AR
Event ID
20050804X01155
Coordinates
34.173053, -91.935554
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

The loss of engine power resulting from a disconnected discharge pressure line at the fuel control unit. A contributing factor was the lack of suitable terrain for the forced landing.

Aircraft Information

Registration
N6626K
Make
GRUMMAN-SCHWEIZER
Serial Number
8C
Engine Type
Turbo-shaft
Year Built
1978
Model / ICAO
G-164CG64T
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
TRITES FLYING SERVICE INC
Address
PO BOX 277
Status
Deregistered
City
GILLETT
State / Zip Code
AR 72055
Country
United States

Analysis

On July 1, 2005, at 1630 central daylight time, a tail-wheel equipped Grumman-Schweizer G-164C single-engine turbine powered agricultural airplane, N6626K, was destroyed during a forced landing following a loss of engine power while performing an aerial application near Gillett, Arkansas. The commercial pilot, sole occupant of the airplane, was not injured. The airplane was registered to and operated by Trites Flying Service, Inc., of Gillett, Arkansas. Visual metrological conditions prevailed and a flight plan was not filed for the 14 Code of Federal Regulations Part 137 aerial application flight. The local flight originated from the operator's private airstrip near Gillett, Arkansas, at 1615.

The 18,738-hour pilot reported in the Pilot/Operator Aircraft Accident Report (NTSB Form 6120.1/2) that during an aerial application of fertilizer to a field, the engine "lost partial power." The pilot initiated a forced landing to a nearby field. During the forced landing, the airplane impacted trees and came to rest upright. Subsequently, a postcrash fire consumed most of the airplane.

Examination of the Allied Signal TPE331-6-252M engine was conducted on July 29, 2005, at the facilities of Air Salvage of Dallas, near Lancaster, Texas, by the NTSB investigator-in-charge (IIC). The examination revealed that the engine was covered with soot, and the "B" nut (tubing nut that is used to hold flared tubing to a threaded fitting) from the discharge pressure line (P3) at the fuel control unit was disconnected. The threads of the "B" nut were also covered with soot.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# DFW05CA177