Summary
On December 05, 2007, a Schweizer 269C (N75068) was involved in an accident near Hazelton, IN. The accident resulted in 1 serious injury. The aircraft sustained substantial damage.
The National Transportation Safety Board determined the probable cause of this accident to be: The pilot's failure to maintain adequate main rotor speed during the intentional autorotation, and his subsequent inability to reduce the descent rate prior to impact. A contributing factor was the intentional autorotation initiated by the pilot.
The pilot initiated an intentional autorotation to a landing site at the destination airport. He recalled that after entering the autorotation, the helicopter drifted and that reaching the intended touchdown point became questionable. The pilot reported that he had intended to add power and continue to the intended landing site, but the helicopter did not seem to respond as expected. The pilot was unable to reduce the descent rate and the helicopter subsequently impacted the ground at the point of intended landing. A post accident inspection did not reveal any anomalies associated with the helicopter.
This accident is documented in NTSB report CHI08CA020. AviatorDB cross-references NTSB investigation data with FAA registry records to provide comprehensive safety information for aircraft N75068.
Accident Details
Probable Cause and Findings
The pilot's failure to maintain adequate main rotor speed during the intentional autorotation, and his subsequent inability to reduce the descent rate prior to impact. A contributing factor was the intentional autorotation initiated by the pilot.
Aircraft Information
Registered Owner (Current)
Analysis
The pilot initiated an intentional autorotation to a landing site at the destination airport. He recalled that after entering the autorotation, the helicopter drifted and that reaching the intended touchdown point became questionable. The pilot reported that he had intended to add power and continue to the intended landing site, but the helicopter did not seem to respond as expected. The pilot was unable to reduce the descent rate and the helicopter subsequently impacted the ground at the point of intended landing. A post accident inspection did not reveal any anomalies associated with the helicopter.
Data Source
Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CHI08CA020