N12463

Substantial
Minor

CESSNA 172MS/N: 17261998

Accident Details

Date
Monday, June 22, 2009
NTSB Number
WPR09CA305
Location
McCall, ID
Event ID
20090622X63028
Coordinates
44.922500, -116.061943
Aircraft Damage
Substantial
Highest Injury
Minor
Fatalities
0
Serious Injuries
0
Minor Injuries
1
Uninjured
0
Total Aboard
1

Probable Cause and Findings

A total loss of engine power during descent due to fuel exhaustion as a result of the pilot's failure to determine the fuel quantity prior to departure.

Aircraft Information

Registration
N12463
Make
CESSNA
Serial Number
17261998
Engine Type
Reciprocating
Year Built
1973
Model / ICAO
172MC172
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
BYRES KEVIN A
Address
611 AERONCA ST
Status
Deregistered
City
INDEPENDENCE
State / Zip Code
OR 97351-9562
Country
United States

Analysis

The pilot, who had flown into a backcountry airstrip with minimal fuel in order to reduce the airplane's takeoff weight when it came time to leave, departed that airstrip for a destination that was reporting overcast clouds. He made the decision to do so because he heard pilots had reported some openings in the overcast layer that might allow him to descend through the clouds as he neared his destination. When he got near the destination, he discovered that there was no way through the overcast, so he returned to the backcountry airstrip. The next day he decided to follow a group of pilots to the same planned destination, but by another route that he was not familiar with. When the other pilots started their engines, the accident pilot realized that he had not yet dipped his fuel tanks to measure fuel quantity, and that the ladder that he needed to perform that function was under camping gear in the airplane. Therefore, so as not to get separated from the pilots he was going to follow en route, he elected to not sump the tanks prior to departure. As he approached the destination airport, one fuel gage read empty, and the other read one-quarter, but its needle had stopped moving/bouncing, which the pilot thought was a, "…bad sign." Soon thereafter the engine lost all power, and although the pilot tried to stretch the glide to the destination airport, he ultimately had to make a forced landing in what appeared to be an open field. During the landing roll, the airplane impacted some cement barrier blocks and collided with a steel fence gate. The pilot reported no mechanical failures or malfunctions at the time of the accident. Post-accident inspection found no usable fuel remaining in the airplanes system.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# WPR09CA305