N9112S

HISTORY OF FLIGHT

On July 25, 2009, 0852 central daylight time, a Beech V35/B, N9112S, lost power during climb and impacted terrain one mile north of the Wiley Post Airport (PWA), Oklahoma City, Oklahoma. The personal flight was being conducted on a visual flight rules (VFR) flight plan under the provisions of 14 Code of Federal Regulations (CFR) Part 91. The airplane was substantially damaged. The pilot was fatally injured, and the four passengers were seriously injured. Visual meteorological conditions prevailed at the time of the accident. The flight had originated from PWA at 0847 and was enroute to the Enid Woodring Regional Airport (WDG), Enid, Oklahoma.

The airplane was on a northerly course two miles northeast of PWA when the pilot reported ”we’ve got an engine out”. The pilot executed an off-airport emergency landing. The airplane impacted a tree and the concrete base of a light pole. It remained upright, coming to rest in a grassy area next to a road approximately 100 feet from the initial impact point. According to first responders there was a significant fuel spill, but no post impact fire.

An aircraft broker that was assisting the pilot with the sale of N9112S said he had never before flown with him until July 21, 2009. On that date they flew in N9112S from the PWA airport to the Larned-Pawnee County Airport (LQR), Larned, Kansas. The pilot did all the flying for all legs of the entire trip. At one point while in-flight, the autopilot somehow became disengaged. The aircraft broker could see that the pilot was not monitoring the airplane and did not seem to realize that the autopilot had failed until he mentioned that they were in a climbing left turn.

Describing the first landing at the LQR airport, the aircraft broker said the pilot was “really hot” on the approach. They had a landing speed of 110 knots over the numbers and a very long landing. Just after touchdown the “engine just quit”, but the pilot was able to restart it and they resumed taxiing in to the ramp. They then met the prospective customer at LQR, who said he wanted to fly to the Garden City Regional Airport (GCK), Garden City, Kansas, to have his mechanic look at the airplane. During the flight from LQR to GCK and the return flight to LQR, the pilot did all of the flying with the customer in the right seat and the aircraft broker in a rear seat. During arrival at GCK, the customer wanted to see an autopilot coupled approach, but the pilot did not seem to be familiar enough to configure the autopilot and had to resort to hand flying the airplane on final approach.

The aircraft broker said that every landing he had seen with the pilot was “very fast”. He said the pilot did not seem to be in control of the airplane and the airplane seemed almost to be “flying him”. The pilot rated customer, in the front seat, also mentioned the pilot’s difficulties with the autopilot and his fast landing speeds.

Both the aircraft broker and the customer commented about the pilot’s decision to fly the airplane through clouds during the flight to GCK, when he did not have an instrument flight rules (IFR) clearance to operate in clouds. The aircraft broker and the customer both expressed their concern to the pilot, and he remained clear of clouds during the return flight to LQR.

The aircraft broker said he had a face to face conversation with the pilot on July 23, 2010. The pilot told him about a flight on the previous day when he was trying to cross-feed on the tip tank and the engine quit in-flight. He was able to immediately restart the airplane by switching to a full main tank. The aircraft broker then advised the pilot that he shouldn’t fly the airplane again until he got his mechanic to look at the problem.

A mechanic, who had been performing maintenance on N9112S for several years, said the pilot had earlier spoken with him about two previous instances when the engine had quit in-flight while “cross-feeding” from the auxiliary fuel tanks, and the mechanic had then made a repair to a loose switch in the panel. The mechanic was not asked to perform any repairs after July 20, 2009/

The pilot’s wife, a frequent passenger, said she could remember at least two times on previous flights when the engine had quit while they were flying, but each time he was able to get it restarted. She said he was a very good pilot and she was comfortable flying with him.

PERSONNEL INFORMATION

The pilot, age 59, held a private pilot certificate with a airplane single-engine land rating, and a instrument airplane rating. The pilot was issued a restricted third-class medical certificate on October 9, 2008.

The pilot completed a biennial flight review (BFR) on July 20, 2009. Examination of the pilot’s log book showed that he had logged a total of 1,459 hours of pilot experience. He had an estimated total of 315 hours of pilot experience in the same make and model airplane, and 12 hours of pilot experience in the accident airplane within the past 90 days.

AIRCRAFT INFORMATION

N9112S, serial number (S/N) D-9856, a model V35/B, was manufactured by the Beech Aircraft Corporation in 1976. It was a low-wing, single engine land airplane. The airplane was originally delivered with a Continental IO-520-BA engine, S/N 562199 rated at 285 horsepower. At the time of the accident it was powered by a Continental IO-520-BB engine, S/N 830058-R, rated at 285 horsepower, driving a McCauley 3-blade, constant speed, aluminum alloy propeller.

The airplane was issued a standard airworthiness certificate on February 12, 1976, in the normal category. The airplane was registered to the owner on August 11, 2005.

The airplane was configured with two seats in the cockpit area, two passenger seats in a second row, and two seats in a third row. There was one cabin door next to the right front seat passenger. Each of the six seats was equipped with a seat belt. The airplane was not equipped with shoulder harnesses (Because of the airplane's year of manufacture shoulder harness installation was not required).

The airplane was equipped with a Garmin GNS 430W navigation and communications unit, and a JP Instruments EDM-700 electronic engine analyzer. At the time of the accident, the pilot was also using a Garmin GPS Map 496 handheld global positioning system (GPS).

The aircraft maintenance records available during the investigation showed that the most recent annual inspection was completed on May 23, 2008, at a tachometer time and aircraft total time of 2,046.9 hours, and an engine total time of 388.9 hours.

Records show that a new annual inspection had been substantially completed on July 20, 2009, but the inspection authority mechanic was waiting for a replacement for an illegible fuel placard. He was also waiting for a logbook entry from a local sheet metal shop for a repair that had been completed.

At the time of the accident, the airplane had accumulated a total time of 2,094.9 hours, and an engine total time of 436.9 hours.

METEOROLOGICAL INFORMATION

At 0853, the automated weather observing system at the PWA airport reported winds from 220 degrees at 10 knots, visibility of 10 miles, skies clear, temperature 82 degrees Fahrenheit, dew point 63 degrees Fahrenheit, with an altimeter setting of 29.93 inches of Mercury.

AIRPORT INFORMATION

The Airport/ Facility Directory, Southwest U. S., indicated that runway 17L/35R at the PWA airport was 7,199 feet long and 150 feet wide. The runway surface was composed of concrete.

WRECKAGE AND IMPACT INFORMATION

The accident site was located on a grassy lawn area in front of a banking facility and was adjacent to a major six-lane thoroughfare inside the city limits. A handheld GPS showed an accident site location of 35 degrees, 33 minutes, 18 seconds north latitude, and 097 degrees, 37 minutes, 52 seconds west longitude, at an estimated elevation of 1,224 feet mean MSL.

Investigators from the Federal Aviation Administration (FAA), Transportation Safety Institute (TSI), and Hawker Beechcraft Corporation (HBC) examined the wreckage at the accident scene on July 25, 2009. Investigators from the Safety Board, FAA, and TSI again examined the accident scene, and examined the wreckage of the airplane on July 28, 2009.

A damaged 30 foot tall tree, struck by the airplane, was observed with limbs and other debris scattered on a 285 degree bearing for approximately 100 feet. A grass kill of more than 2,000 square feet was observed extending from the tree struck by the airplane and continued in the direction of the spot where the main wreckage was located.

The airplane was observed upright and oriented on a heading of 140 degrees. All portions of the airplane were found at the accident location. The leading edges of both wings of the airplane had impact damage and vegetation smears that corresponded to the damaged tree. The front portion of the right tip tank had separated from the airplane and was found ten feet southwest of the concrete base of a light pole. Smears of paint and impact damage on the leading edge of the tip tank corresponded to impact marks on the concrete base of the light pole. First responders had used the “jaws of life” to cut the roof pillars and peel back the roof. The cabin area was exposed.

The engine was separated from the engine mounts, but remained attached to the airframe by cable and control lines. The flaps were observed in the up position and the landing gear was observed in the up position. The fuel selector valve was observed in the left main tank position, The battery switch and alternator switch were found in the on position. The magneto switch was found in the off position. The aux fuel pump switch was found in the off position and operated freely. The tip cross feed switch, located next to the fuel selector valve, was separated from its mounting location. Its switch position could not be determined.

After the wreckage was lifted and moved to a nearby storage hangar, the investigators observed damage ...