N8815U

Substantial
None

EAGLE Eagle DW-1S/N: DW-1-0094-83

Accident Details

Date
Tuesday, June 1, 2010
NTSB Number
WPR10LA272
Location
Waterville, WA
Event ID
20100601X90428
Coordinates
47.650001, -120.050003
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

A worn wire in the magneto system, which allowed intermittent grounding and a loss of engine power.

Aircraft Information

Registration
Make
EAGLE
Serial Number
DW-1-0094-83
Engine Type
Reciprocating
Year Built
1983
Model / ICAO
Eagle DW-1DW1
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
1
FAA Model
EAGLE DW-1

Registered Owner (Current)

Name
HENDRICKSON TYREL L
Address
PO BOX 507
City
CHESTER
State / Zip Code
MT 59522-0507
Country
United States

Analysis

On June 1, 2010, about 1129 Pacific daylight time, an Eagle DW-1, N8815U, made an off airport forced landing near Waterville, Washington. The owner was operating the airplane under the provisions of 14 Code of Federal Regulations (CFR) Part 91. The certificated commercial pilot was not injured. The airplane sustained substantial damage to the empennage. The cross-country positioning flight departed Waterville about 1115, with a planned destination of Missoula, Montana. Visual meteorological conditions prevailed, and no flight plan had been filed.

The pilot was positioning the airplane for export, when he encountered a loss of engine power. He made a forced landing in a soft field, and the airplane nosed over.

A Federal Aviation Administration (FAA) inspector examined the wreckage. He discovered an anomaly with wiring on one magneto. The 'P' lead is a shielded wire with the primary grounding wire inside of the insulator which, in turn, is surrounded with a braided shielding wire. The shielding wire is always grounded. The inner 'P' wire is grounded at the ignition switch when the key is off. In this case the inner 'P' lead and the insulation were broken through. The wire was held together by about 1/3 of the shielding wire. As the air and vibration moved the wire around, it caused the inner 'P' lead to intermittently come in contact with the always grounded shielding wire. In turn, that allowed the magneto to intermittently turn on and off, causing the engine to surge and lose power.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# WPR10LA272