N5781A

HISTORY OF FLIGHT On June 23, 2012, about 1513 Pacific daylight time, a Cessna 172, N5781A, was substantially damaged when it collided with trees and terrain during takeoff initial climb from the Crow-Mag Airport (33OR), near Veneta, Oregon. The commercial pilot and three passengers were fatally injured. The airplane was registered to a private individual and operated by the pilot under the provisions of Title 14 Code of Federal Regulations Part 91, as a personal flight. Visual meteorological conditions prevailed and no flight plan was filed. The local flight was originating at the time of the accident.

Several witnesses located adjacent to the accident site reported hearing the airplane takeoff from the airport nearby their residences. Witnesses stated that the airplane's engine sounded normal and then suddenly just stopped. One witness, who was outside his home, just south of the runway, reported that he saw the accident airplane fly over 100-foot tall trees north of his position at an altitude of about 200 feet above ground level (agl) and that the engine sounded normal. The witness said that while he directed his attention away from the airplane momentarily, he heard the engine suddenly stop and he immediately looked back and observed the airplane descend into 100-foot tall trees.

A friend of the pilot, reported to the National Transportation Safety Board (NTSB) investigator-in-charge (IIC) that the purpose of the accident flight was to provide a scenic tour around the vicinity of the airport for the three passengers. He said that the accident flight was the first flight of the day and that the airplane had been flown for about 1.7 hours since the airplane had been refueled in Cottage Grove, Oregon.

PERSONNEL INFORMATION

The pilot, age 41, held a commercial pilot certificate with an airplane single-engine land, airplane single-engine sea, airplane multi-engine land, rotorcraft helicopter, glider, and instrument airplane and helicopter ratings. A second-class airman medical certificate was issued on August 23, 2011, with no limitations stated. The pilot reported on his most recent medical certificate application that he had accumulated 1,600 total flight hours. The pilot’s most recent logbook was not located.

AIRCRAFT INFORMATION

The four-seat, high-wing, fixed-gear airplane, serial number (S/N) 28381, was manufactured in 1956. It was powered by a Continental O-300-A engine, serial number 11772-D-6-A, rated at 145 horse power. The airplane was equipped with a McCauley fixed pitch propeller. As of the most recent calculated weight and balance, dated July 2, 2008, the empty weight of the airplane was 1,331.50 pounds. The maximum gross weight was 2,200 pounds.

Review of the maintenance records for the airplane revealed that the most recent annual inspection was completed on August 1, 2011, at an airframe total time of 6,162.56 hours, tachometer time of 1,562.06 hours, and an engine time since major overhaul of 1,170 hours. The engine was overhauled on April 2, 1978, and was installed on the accident airplane on June 1, 1997, at a tachometer time of 1,146 hours and an engine total time of 5,745.5 hours.

Using the reported weights of the pilot and three passengers, approximately 30 pounds for items within the airplane, 28 gallons of fuel, and the airplane, the IIC calculated the weight of the airplane to be about 2,139 pounds at the time of the accident and within center of gravity limits.

Review of the Pilot’s Operating Handbook for the accident airplane revealed that there are no published performance charts for takeoff from a turf runway.

METEOROLOGICAL INFORMATION

A review of recorded weather data from the Mahlon Sweet Field Airport, Eugene, Oregon, automated weather observation station, located 8.6 miles northeast of the accident site, revealed at 1454 conditions were wind from 260-degrees at 14 knots, visibility 10 statute miles, few clouds at 4,000 feet, scattered clouds at 7,000 feet, broken clouds at 22,000 feet, temperature 16-degrees Celsius, dew point 8 degrees Celsius, and an altimeter setting of 29.86 inches of mercury, remarks Cumulonimbus Clouds in the distance north west of the airport, showers to the west of the airport.

According to the Federal Aviation Administration Special Airworthiness Information Bulletin, entitled Carburetor Icing Prevention, the temperature and dew point were conducive to the formation of serious icing at glide power.

AIRPORT INFORMATION

The Crow-Mag Airport (33OR) is a private airport that features a single 3,200-foot long turf runway (15/33). The reported airport elevation is 450 feet mean sea level (msl). During a telephone conversation, the owner of the airport reported that he mows the runway surface to about 3 inches in height and that it was last mowed two days prior to the accident. In addition, the owner of the airport reported that there had been multiple rain showers within the vicinity of the airport prior to the accident flight and that the grass runway was damp.

WRECKAGE AND IMPACT INFORMATION

Examination of the accident site revealed that wreckage debris and broken tree limbs were scattered about 80 feet along an approximate 174-degree magnetic heading from a cluster of scraped and broken trees. The right wing was lodged in one of the damaged trees at the beginning of the debris path, about 70 to 75 feet above ground level. The right horizontal and right elevator was located about 20 feet from the first identified point of contact (FPIC). The left horizontal, left elevator, vertical stabilizer, and rudder were located about 40 feet beyond the FPIC. The main wreckage came to rest inverted about 80-feet from the FPIC, oriented on a heading of about 235-degrees magnetic.

Examination of the left wing revealed that the aileron remained attached to the wing via all respective mounts. The leading edge was crushed aft about 1 foot inboard of the lift strut wing attach point, consistent with an impact with a circular object (tree trunk). The left wing fuel pickup fuel line was compromised. The fuel tank cap and seal were intact and undamaged. No fuel was found within the left wing fuel tank, however, a blue stain was observed on the top portion of the left wing about mid span.

The right wing was separated from the fuselage via all its mounts. The leading edge exhibited a large circular impression about 2 feet outboard of the wing root, and extended aft to the main spar. The right wing fuel tank was dislodged from the wing structure and was located within the wreckage debris path. The fuel tank cap and seal were intact and undamaged. About 2 gallons of fuel was removed from the fuel tank and multiple holes were observed in the fuel tank.

The fuselage came to rest inverted. The fuselage structure surrounding the cabin area was compressed. The left and right horizontal stabilizers, left and right elevators, rudder, and vertical stabilizer were separated from the fuselage. The right elevator remained attached to the right horizontal stabilizer via its outboard two mounts. The leading edge of the right horizontal stabilizer was crushed aft near the inboard portion of the stabilizer. The left horizontal stabilizer exhibited a circular leading edge impression about 14 inches from the inboard root, and extended aft to the spar. The elevator remained attached to the left horizontal stabilizer via its two outboard mounts. The vertical stabilizer was intact. The lower portion of the rudder was displaced right and exhibited bending and buckling.

Examination of the cockpit controls revealed that the throttle was in the idle position and was bent downwards. The mixture was in the full forward or full rich position. The primer was in and locked, and the carburetor heat was pulled out about half way. The magneto key switch was in the “both” position. The fuel selector valve was in the “both” position. The flap handle was found in the stowed position, consistent with the flaps up position.

Flight control continuity was established throughout to all primary flight control surfaces from the cockpit controls. Several separations of the control cables were observed and were splayed, consistent with overload.

The engine remained attached to the fuselage via one of the four engine mounts. The carburetor was partially separated from its mount. The rest of the engine accessories remained attached to the engine via their respective mounts. All of the top sparkplug leads were bent and damaged, consistent with impact damage. The top spark plugs were removed and exhibited dark gray, almost black in color deposits within the electrode area and displayed normal wear signatures when compared to the Champion Check-A-Plug comparison chart. The carburetor fuel screen was removed from the carburetor and was free of debris.

In order to facilitate an engine run, the carburetor mount flange was repaired using JB Weld, Duct Tape, and Plumbers Putty. The carburetor was reinstalled on the engine and secured. Battery power was applied to the airplane and it was determined that the starter was inoperative. A new starter was installed on the engine. An external fuel source was connected directly to the carburetor fuel inlet port. Battery power was applied and the engine was started using the airframes starter button. The engine ran throughout various power settings to about 1,700 rpm with no anomalies noted. The power was not advanced higher than 1,700 rpm due to the damaged engine mounts. A magneto check was conducted at 1,200 rpm with no anomalies noted. The engine was shut down normally by moving the mixture control to the idle cutoff position.

A postaccident examination of the airframe and engine revealed no evidence of mechanical malfunctions or failures that would have precluded normal operation.

MEDICAL AND PATHOLOGICAL INFORMATION

The Lane County Coroner conducted an autopsy on the pilot on June 25, 2012. The medical examiner determined that the cause of death wa...