N33CG

HISTORY OF FLIGHT

On June 30, 2012, about 1620 eastern daylight time, a Piper PA-31P, N33CG, collided with terrain while descending following loss of power in one engine shortly after takeoff from Dalton Municipal Airport (DNN), Dalton, Georgia. The private pilot was fatally injured, and the airplane sustained substantial damage by impact forces and postcrash fire. Visual meteorological conditions prevailed, and no flight plan was filed. The personal flight was conducted under 14 Code of Federal Regulations Part 91. The flight originated from DNN at 1615.

According to a friend of the pilot, the pilot was en route to Douglas Municipal Airport (DQH), Douglas, Georgia, to have an annual inspection completed on the airplane. The friend said that he assisted the pilot prior to departure and watched as the airplane departed. He did not notice any anomalies with the airplane during the takeoff or the climbout, it seemed normal.

According to witnesses, they heard an airplane coming towards them, and it sounded like it was flying very low. One witness looked up and saw the airplane 200 feet over his house and descending towards the trees. As he watched the airplane, he noticed that the right propeller was not turning, and the engine was not running. He went on to say that the left engine sounded as if it was running at full power. The airplane pitched up to avoid a power line and rolled to the right, descending below the tree line. A plume of smoke and an explosion followed.

PERSONNEL INFORMATION

The pilot, age 52, held a private pilot certificate for airplane single-engine land and multi-engine land with instrument airplane issued August 8, 1998, and a third-class airman medical certificate issued on May 1, 2012, with limitations for corrective lenses. Review of the pilot’s logbook revealed that he accumulated 1,614 flight hours as pilot in command and a total of 1,132 multi-engine flight hours as of June 16, 2012. Further review of the current logbook showed 155 multi-engine flight hours were completed during the 6 years before the accident.

AIRCRAFT INFORMATION

The six-seat, low-wing, retractable-gear airplane, serial number 31P-7300157, was manufactured in 1973. It was powered by two Lycoming TIGO-541-E1A 310-hp engines equipped with Hartzell HC-C3YN-2LUF hubs and FJC9684-3R blades. This type propeller is a 3-blade single-acting, hydraulically operated, constant-speed model with feathering capability. Oil pressure from the propeller governor is used to move the blades to the low pitch blade angle direction. A spring, counterweights, and an air charge move the blades to the high pitch/feather direction in the absence of governor oil pressure. The propeller incorporates a start lock mechanism that holds the blades at a low blade angle during engine start. Propeller rotation is counterclockwise

as viewed from the rear.

Review of copies of maintenance logbook records showed an annual inspection was completed June 18, 2011, at a recorded Hobbs reading of 981.5 hours, airframe total time of 4445.6 hours. The left engine was overhauled on November 10, 1998, and its time since major overhaul as of June 18, 2011, was 580.8 hours. The right engine was overhauled on October 28, 1988, and its time since major overhaul as of June 18, 2011, was 1,435 hours. According to the Lycoming service instruction No. 1009AS, 1,200 hours are recommended between overhaul, and all engines that do not accumulate the hourly period of time between overhauls are recommended to be overhauled in the 12th year. The tachometer and the Hobbs hour-meter were not observed at the accident site.

According to the airport manager at the Taylor County Airport (AAS), Campbellsville, Kentucky, the pilot took on fuel on June 24, 2012, but he fueled his own airplane, and no records were recovered showing the amount of fuel that received. The pilot did not refuel at the airport on the day of the flight. Video footage showed the airplane climbout normally prior to the accident.

METEOROLOGICAL INFORMATION

The reported weather at DNN, which was located about 2 miles east of the accident site, at an elevation 709 feet, at 1615, was: winds calm, visibility 10 statute miles; clear skies; temperature 39 degrees Celsius (C); dew point 15 degrees C; altimeter 29.87 inches of mercury.

WRECKAGE AND IMPACT INFORMATION

The airplane was examined at the accident site on June 30 and July 1, 2012. The accident site was located about 2 miles west of the runway 14 in a wooded area with varied tree heights up to about 80 feet. The airplane came to rest upright in a flat attitude on a course of about 102 degrees. The cockpit, cabin, and everything forward of the empennage and wings were fire-damaged. A series of tree strikes were observed about 50 feet above the ground, south of the main wreckage. All major flight components were accounted for at the accident site. Continuity of the flight controls could not be manipulated but were verified to their respective flight control surfaces.

The instrument panel was totally destroyed by impact and post impact ground fire. No useful information was acquired from any instrumentation. The engine power controls quadrant was separated from the instrument panel. The controls preimpact positions could not be reliably verified due to impact and post impact fire damage of the components.

The cockpit section from the instrument panel area aft to the rear pressure bulkhead was breached and completely destroyed by ground impact and post impact ground fire. All windows and seats were destroyed by fire. No seat restraints were noted or located. Seat tracks were damaged or destroyed by impact and post impact fire. All doors were destroyed by impact and post impact ground fire. Viewable doors were noted to have the locking pins extended.

The fuel selector valves were located, the left valve was heat-damaged, and the right valve was heat-damaged and exhibited some molten metal adhering to it. Due to the impact damage of the fuel valves, the preimpact position of the fuel tank selection could not be determined. The left and right control wheels were separated from the panel and severely damaged by impact and the post impact fire. The rudder pedals were impact and fire damaged and could not be manipulated; control cables were noted in the vicinity of the pedals. Impact damage prevented fully tracing control cable continuity to the forward cabin area. The landing gear selector and flap selector were each noted in the up position. The nose gear was located under the cabin section and impact- and fire damaged.

The left wing was separated from the fuselage attachment. It was completely destroyed by impact and the post impact fire. The outboard section was located in tree approximately 105 feet behind the main wreckage. The landing gear and a portion of the flap, which were in the up position, were attached and destroyed by post impact fire. All fuel tanks were breached and destroyed by post impact fire. All viewable fuel caps appeared in the closed, locked position. Aileron cables were traced from overload separation point to the cabin area.

The right wing was separated from the airframe. It was destroyed by impact and the post impact fire. The landing gear and flap remnant were attached and were noted to be in the up position. Both were destroyed by post impact fire. All fuel tanks were breached and destroyed by post impact fire. All viewable fuel caps appeared in the closed, locked position. Control cable continuity was traced to the wing root separations and from there to the cabin area. The aileron trim drum indicated that the tabs were trailing-edge-down.

The vertical fin was noted to be attached to the tail cone. It was impact-and fire-damaged. The rudder remained attached to the vertical fin and exhibited impact damage and post impact fire damage. It was positioned to the left of vertical fin center line with the trim tab off-set to the right. Control cable continuity was traced from the cable breaks to the rudder and from the breaks forward. Rudder movement was noted when the rudder cables were manipulated at the cable breaks. The ELT was noted in the wreckage, and it was destroyed by post impact fire.

The left and right horizontal stabilizers showed impact and post impact fire damage. The elevators were attached. The left horizontal and elevator were bent upward, and both elevator trim tabs were trimmed down. No airframe preimpact anomalies were noted during the on-site inspection.

Examination of the right engine revealed it remained attached to the right wing nacelle assembly frame. The propeller was broken away from the engine gear drive. All of the cylinders remained attached to the crankcase. The accessories on the engine were fire-damaged. The exhaust and induction systems exhibited damage. Both magnetos were fire-damaged and were separated from the engine. The top spark plugs were removed, and their electrodes were intact and exhibited normal operating signatures in accordance with the Champion aviation check-a-plug comparison chart.

The fuel pump exhibited fire damage. The fuel pump drive gear was removed, and its respective coupling was intact. The crankshaft was turned, and the fuel pump gear rotated accordingly.

The fuel manifold was fire-damaged, and the intake tubes were crushed. The throttle fuel control assembly exhibited fire damage. The throttle plate position was unreliable due to fire damage. No fuel was noted within the fuel system. All cylinders were inspected using a lighted borescope. The piston heads did not exhibit damage. The turbocharger exhibited impact and fire damage. The turbocharger was fire and impact damaged and remained attached to the engine. The turbocharger drive shaft partially rotated by hand. The wastegate assembly exhibited fire damage. The wastegate valve was observed in approximately the half-open position. The vacuum pump was separated from the engine and exhibited imp...