N108MF

HISTORY OF FLIGHT

On October 9, 2012, about 2003 eastern daylight time, a Bell 407, N108MF, operated by ACS Helicopters LLC., was substantially damaged when it impacted trees and terrain in Coolbaugh Township, Pennsylvania. The airline transport pilot and one passenger were fatally injured, and one passenger was seriously injured. The corporate flight was conducted under the provisions of 14 Code of Federal Regulations (CFR) Part 91. Dark night instrument meteorological conditions (IMC) prevailed and no flight plan was filed for the planned flight to Westchester County Airport (HPN), White Plains, New York. The flight last departed Elmira/Corning Regional Airport (ELM), Elmira, New York about 1845.

According to recovered cockpit documentation and passenger interviews, on the day of the accident, the helicopter departed Somerset Airport (SMQ), Somerville, New Jersey at 0730 for Morristown Municipal Airport (MMU), Morristown, New Jersey. After arriving at MMU at 0753, the pilot boarded four passengers, and then departed at 0830 for Camden County Airport (19N), Berlin, New Jersey, where it arrived at 0920. After having breakfast, the four passengers then played golf from approximately 1030 to 1500, and then socialized for approximately an hour before returning to the airport, where they once again boarded the helicopter. At 1630, the helicopter then departed for SMQ, landing there at 1710, and deplaned one passenger. At 1720 the helicopter departed once again, this time for ELM with three of the original four passengers onboard. After arriving at ELM at 1830 another passenger deplaned, and at 1845 the helicopter with the pilot and two of the original four passengers departed for HPN.

According to the surviving passenger, after taking off from ELM, the weather "began to get worse," and the pilot advised them that they would not make it to HPN. The weather became "even worse" and the pilot decided to divert to Pocono Mountains Municipal Airport (MPO), Mount Pocono, Pennsylvania. The surviving passenger then texted his wife and advised her that they were "3 miles/ 3 minutes" from MPO and that they were going to land there. When he looked out of the window it was "misty and dusky" and he thought it must have been around 1930 or later. He advised that the "crash" happened shortly thereafter.

According to a witness, at approximately 1945, she heard a helicopter that sounded "like it was going to land on my house" and that the helicopter was "extremely low" at a "really low altitude" in the area of Interstate 380 (I-380) and the Daleville exit.

A truck driver in the vicinity also reported that he saw the helicopter flying "very low" and observed it passing over a Pennsylvania Department of Transportation shed near exit 20 (the Daleville exit) heading southbound along the south bound lane of Interstate 380. All of its lights were on, and at first he thought it was a state trooper 'All lit up" chasing someone down the highway. He described the helicopter as being "at or below, 200 feet off the deck." The visibility was low, and the helicopter was under the "low fog." He also advised that it was like "pea soup" around the area of I-380 and the Daleville exit.

According to a limousine driver who was supposed to pick up one of the passengers at HPN, at 1938 he had received a text from the passenger stating that they were "running late". Then at 1953, he received another text instructing him to go back to MMU to pick up the passenger. After arriving at MMU, the driver waited but the helicopter never arrived.

A search by Federal, State, and Local authorities was initiated. On October 10, 2012 at approximately 0230 the helicopter was discovered in a heavily wooded area adjacent to the south bound lane of I-380 approximately 1.3 miles northwest of MPO.

PERSONNEL INFORMATION

According to Federal Aviation Administration (FAA), Bell Training Academy, and American Airlines records, the pilot in addition to flying for ACS Helicopters also flew for American Airlines as a First Officer. He held an airline transport pilot certificate with ratings for airplane multi-engine land, commercial privileges for airplane single-engine land, and rotorcraft-helicopter. He also held Type Ratings for the ATR-42, ATR-72, CE-500, DC-9, and HS-125, in addition to a flight engineer certificate for turbojet powered airplanes.

On November 3, 2009, he took his private pilot rotorcraft-helicopter examination in a Robinson R44. On that date, he reported that he had accrued 77 total hours of helicopter flight experience.

From November 16th to November 20th, 2009, he attended Bell 407 initial ground and flight training which included ground training, training in a flight training device, and flight training in the Bell 407.

On July 14, 2010, he took his commercial pilot rotorcraft-helicopter examination in a Robinson R44. On that date, he reported that he had accrued 202 total hours of helicopter flight experience.

On August 9th and 10th 2010, he attended bell 407 refresher training which included ground training, training in a flight training device, and flight training in the Bell 407.

On October 28, 2010, the pilot received one additional hour of flight training in the Bell 407.

On May 16th and 17th, 2011, he once again attended Bell 407 refresher training which included ground training, training in a flight training device, and flight training in the Bell 407.

On May 7th and 8th, 2012, approximately 5 months prior to the accident, he attended Bell 407 refresher training again which included ground training, training in a flight training device, and flight training in the Bell 407. At the time of his refresher training he reported to the Bell Training Academy that that he had approximately 400 total hours of helicopter flight experience, which included, approximately 350 hours in the Bell 407, and approximately 50 hours in the Robinson R44.

His most recent application for an FAA first-class medical certificate was dated June 1, 2012. On that date, he reported 19,000 hours of total flight time. Though he held an Airline Transport Pilot Certificate which allowed him to fly under IMC in airplanes, He did not possess an instrument-helicopter rating, and review of information provided by Bell Helicopter revealed no evidence of any inadvertent IMC or Instrument Flight Rules (IFR) helicopter training for the pilot during training at the Bell Training Academy.

Examination of the pilot's flight time and duty time provided by American Airlines revealed that on the day before the accident he had reported for duty at 0810 edt at Newark Liberty International Airport (EWR), Newark, New Jersey one hour prior to his scheduled departure to Dallas/Fort Worth International Airport (DFW), Dallas, Texas, then flew 7 hours and 10 minutes arriving back at EWR at 1741 edt. Further examination of his schedule also revealed that he was also scheduled to fly another EWR-DFW-EWR round trip the day after the accident occurred, and was scheduled to sign in at 1155 edt.

AIRCRAFT INFORMATION

The accident aircraft was a single-engine helicopter of conventional construction. It was equipped with a four-blade, soft-in-plane design, composite hub, main rotor system. A full monococque aluminum skinned tailboom, and conventional two blade tail rotor system. It was powered by a 650 shaft horsepower, Rolls-Royce/Allison 250-C47B turboshaft engine.

The original electro-mechanical instrumentation and spinning mass gyroscopes had been replaced with a SAGEM Integrated Cockpit Display System (ICDS) which consisted of electronic attitude & heading sensors and two 10-inch liquid crystal displays. One display functioned as a primary flight display and was vertically oriented on the right side of the instrument panel in front of the pilot, and the second display was horizontally-oriented and functioned as an engine instrument and multi-function display on the left side of the instrument panel. Standby analog instruments (clock, airspeed, attitude, and altimeter) were also provided.

The helicopter was certificated for land operation under day or night visual flight rules (VFR) in non-icing conditions. It was not certificated for IFR operations.

According to FAA and maintenance records the helicopter was manufactured in 2007. The helicopter's most recent annual inspection was completed on August 3, 2012. At the time of the accident, the helicopter had accrued 837.3 total hours of operation.

METEOROLOGICAL INFORMATION

Satellite Imagery and Weather Radar

Review of satellite imagery of the accident area revealed that cloudy conditions existed over eastern Pennsylvania. Weather radar returned reflectivity values which indicated that light rain was present. Surface temperatures were above freezing indicating that freezing rain and freezing fog were not present.

Automated Surface Observing System.

Recorded weather obtained from MPO's automated surface observing system located approximately 1.3 miles southeast of the accident site also revealed that low instrument flight rules weather existed around the time of the accident with vertical visibility of 200 feet and variable auto sensor visibility down to 1/2 mile, with a light east wind and light rain as indicated by METARs where:

- At 1953, the recorded weather included: wind 120 degrees at 6 knots, visibility 3/4 mile, light rain, mist, vertical visibility 200 feet, temperature 09 degrees C, dew point 09 degrees C, and an altimeter setting of 30.10 inches of mercury.

- At 2003, the recorded weather included: wind 100 degrees at 6 knots, visibility 1 1/4 miles, light rain, mist, overcast ceiling of 200 feet, temperature 09 degrees C, dew point 09 degrees C, and an altimeter setting of 30.10 inches of mercury.

- At 2017, the recorded weather included: wind 110 degrees at 5 knots, visibility 1/2 mile, light rain, fog, vertical visibility 200 feet, temperature 09 degrees C, dewpoint 09 degrees C, and an altimeter setting of 30.1...