N47717

Substantial
Serious

PIPER PA-28S/N: 28-7816126

Accident Details

Date
Tuesday, May 7, 2013
NTSB Number
WPR13CA219
Location
Cottonwood, AZ
Event ID
20130507X41157
Coordinates
34.729999, -112.035003
Aircraft Damage
Substantial
Highest Injury
Serious
Fatalities
0
Serious Injuries
1
Minor Injuries
0
Uninjured
0
Total Aboard
1

Probable Cause and Findings

The student pilot's decision to attempt a night landing on an unlit runway, which resulted in a misaligned approach and subsequent collision with a fence. Contributing to the accident was the student pilot's improper set-up of the airplane radios, which resulted in his inability to activate the airport runway lights, and his mistaken identification of building lights for runway lights.

Aircraft Information

Registration
N47717
Make
PIPER
Serial Number
28-7816126
Engine Type
Reciprocating
Year Built
1977
Model / ICAO
PA-28P28A
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
SALE REPORTED
Address
RR 2 BOX 1635
Status
Deregistered
City
CHECOTAH
State / Zip Code
OK 74426-9619
Country
United States

Analysis

The student pilot reported that he was flying the airplane from Oklahoma to California in pursuit of employment opportunities. During that trip, he was attempting a night landing for a fuel stop at an unattended airport, and was unable to activate the runway lights via radio. He made one approach to runway 32, executed a missed approach, and then initiated an approach to the opposite end, runway 14. He conducted that approach based on "two lights that he thought were the runway" lights. When the airplane was very close to the ground, the pilot realized that the lights were security lights on a building, and initiated a go-around. However, the airplane struck an airport boundary fence to the northeast of the runway, and came to rest on a street outside airport property. The wings and fuselage were substantially damaged by the impact with the fence. Postaccident examination revealed that the number one communications radio in the airplane was set to the proper frequency to activate the runway lights, but that the radio selector switch was set to the number two communications radio, which was set to a different frequency. When power was applied to the airplane and the radio selector switch was set to the number one radio, the runway lights were successfully activated. The pilot reported no preimpact mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# WPR13CA219