N8223W

HISTORY OF FLIGHTOn August 23, 2013, about 1838 Pacific daylight time, a Piper PA-28-180 airplane, N8223W, was substantially damaged when it impacted trees and terrain shortly after takeoff from runway 20 at Sacramento Executive Airport (SAC), Sacramento, California. The private pilot and certified flight instructor (CFI) received serious injuries. The airplane was operated by Capitol Flying, Inc., and the instructional flight was conducted under the provisions of Title 14 Code of Federal Regulations Part 91. Visual meteorological conditions prevailed, and no Federal Aviation Administration (FAA) flight plan was filed for the flight.

According to the pilot, he had recently purchased a membership share in Capitol Flying, Inc., in order to utilize their airplanes. He enlisted the CFI to provide a checkout in the accident airplane, in order to comply with club membership requirements. The accident flight was their second flight in the airplane. They planned to conduct some airwork, fly to University airport (EDU), Davis, California, conduct some pattern work, then return to SAC. Preflight inspection detected no anomalies, and the airplane had about 36 gallons of fuel on board.

Engine start, taxi out to runway 20, engine runup, and the takeoff roll were all normal. Shortly after takeoff, the engine "sputtered" momentarily, but restored to full/normal power for a very brief time. Both the pilot and the CFI believed that this occurred at an altitude of about 500 to 600 feet above ground level (agl). Very shortly thereafter, the engine stopped producing sufficient power for flight, and was running "roughly." In response to the CFI's instruction, the pilot moved the fuel selector handle to switch fuel tanks. The pilot and CFI verified that the throttle and mixture controls were in their full forward positions, but no improvement was noted, and the airplane continued to descend. Neither pilot could recall whether they attempted to apply carburetor heat or not. They turned the airplane to the left to attempt to land in a clear area on a golf course, but the airplane struck intervening trees. Golfers on the course extracted the pilot and CFI from the airplane, tended to them, and summoned first aid. Neither the pilot nor the CFI recalled any events between the tree strikes and finding themselves in the ambulances. PERSONNEL INFORMATIONPilot Under Instruction

The pilot held a private pilot certificate with an airplane single-engine land rating. He obtained that certificate in October 2011. His most recent FAA second-class medical certificate was issued in August 2013. The pilot reported that he had a total flight experience of about 74 hours. His only prior experience in the accident airplane make and model was the previous flight a week earlier; the duration of that flight was approximately 1/2 hour.

Certified Flight Instructor

The CFI held instructor ratings for airplane single- and multi-engine land, and instrument airplane. He estimated that he had a total of about 7,000 hours of flight experience, including about 500 hours in the accident airplane make and model. His most recent FAA first-class medical certificate was issued in April 2013. AIRCRAFT INFORMATIONFAA information indicated that the airplane was manufactured in 1965 as Piper serial number 28-2356. It was a low-wing, fixed gear tricycle configuration, and was equipped with a Lycoming O-360 series engine. The airplane was not equipped with shoulder harnesses. According to the airplane flight log sheet, the airplane had been flown about 3.5 hours in the week preceding the accident. The accident flight was the first flight since August 20, 2013.

The maintenance records indicated that the most recent annual inspection was completed in March 2013, when the airframe had a total time of about 5,714 hours, and that the tachometer registered about 4,476 hours. At the time of that annual inspection, the engine had accumulated about 1,430 hours since overhaul. The only logged engine maintenance subsequent to the most recent annual inspection was an oil change on June 15, 2013, at a tachometer time of 4,528 hours, and an engine total time of about 1,482 hours METEOROLOGICAL INFORMATIONThe SAC 1853 automated weather observation included winds from 200 degrees at 7 knots, visibility 10 miles, clear skies, temperature 27 degrees C, dew point 11 degrees C, and an altimeter setting of 29.74 inches of mercury.

Temperature and dew point values for the approximate time of the accident indicated that the relative humidity was approximately 35 percent. When the intersection of the two temperature values was located on a chart that depicted carburetor ice envelopes, the point was in the region of the chart denoted as "Serious Icing at Glide Power," near the boundary of the region denoted as "Icing - Glide and Cruise Power." AIRPORT INFORMATIONFAA information indicated that the airplane was manufactured in 1965 as Piper serial number 28-2356. It was a low-wing, fixed gear tricycle configuration, and was equipped with a Lycoming O-360 series engine. The airplane was not equipped with shoulder harnesses. According to the airplane flight log sheet, the airplane had been flown about 3.5 hours in the week preceding the accident. The accident flight was the first flight since August 20, 2013.

The maintenance records indicated that the most recent annual inspection was completed in March 2013, when the airframe had a total time of about 5,714 hours, and that the tachometer registered about 4,476 hours. At the time of that annual inspection, the engine had accumulated about 1,430 hours since overhaul. The only logged engine maintenance subsequent to the most recent annual inspection was an oil change on June 15, 2013, at a tachometer time of 4,528 hours, and an engine total time of about 1,482 hours WRECKAGE AND IMPACT INFORMATIONThe wreckage was located on a golf course that was situated adjacent to the southern boundary of SAC. The fuselage came to rest inverted. Both wings had fracture-separated during the impact sequence, but the fuselage and cabin remained essentially intact. The engine remained attached to its mount, which remained partially attached to the fuselage. There was no fire, but firefighters did spray the wreckage with water due to the fact that the airplane was leaking fuel. The site was photographically documented by first responders, and the wreckage was then recovered to a secure facility for detailed examination.

Representatives from the NTSB, the FAA, Lycoming Engines, and Piper Aircraft conducted a detailed examination of the wreckage in December 2013. All major components of the airframe and engine were accounted for. Flight control continuity was established for all primary and secondary flight controls. The flaps were determined to be up/retracted at impact, and the stabilator (pitch) trim was in the 'neutral' setting.

The engine primer control was found in the 'in and locked' position. The throttle, mixture, and carburetor heat controls were all found in their full forward positions, and were securely attached at their respective control arms in the engine compartment. Damage to the carburetor heat airbox and actuation cable was consistent with the carburetor heat in the OFF (heat not applied) setting at impact.

The ignition switch was found in the OFF position, and the key was absent. The master and fuel pump toggle switches were found to be in their OFF (switch down) positions, but several other nearby toggle switches on the same sub-panel were found in their respective ON (switch up) positions. The fuel selector handle was found in the OFF position. One first responder reported to the news media that he had turned the fuel selector to OFF, but the investigation was unable to determine whether any other switches or controls had been moved, either intentionally or unintentionally, by first responders.

The airplane fuel system, including tanks, screens, lines, valves, and pump did not exhibit any anomalies that could not be attributed to impact. The gascolator bowl was partially separated from its housing, but the fuselage was damaged in this region, and the bowl's loose condition was consistent with impact damage. No fuel staining indicative of a loose bowl during flight was observed. Fuel selector valve functionality was verified.

Visual examination of the engine did not reveal any evidence of pre-impact mechanical failure or fire. The engine sustained moderate impact damage to its forward lower region, including the exhaust system, baffling, and alternator.

The bottom spark plugs were removed, and the crankshaft was rotated manually. The crankshaft rotated freely in both directions. "Thumb" compressions were observed in proper sequence on all four cylinders. The entire valve train was observed to operate in proper sequence, and was free of any pre-impact mechanical malfunction. Mechanical continuity was confirmed for the crankshaft, pistons, and accessory section via crankshaft rotation. Clean, uncontaminated oil was observed at all four rockerbox areas.

The combustion chambers and valves of all cylinders were undamaged, with no evidence of foreign object ingestion, valve-piston contact, or detonation. The gas path and combustion signatures at the spark plugs, combustion chambers, and exhaust system components displayed coloration consistent with normal operation. No oil residue was observed in the exhaust system gas path.

Both magnetos remained securely attached to their respective mounting pads, and were undamaged. Magneto to engine timing could not be determined due to the separation of the flywheel and propeller, but the two magnetos were timed to within 1 degree of each other. The "P" lead of each magneto remained securely attached. Each magneto produced sparks at all towers during manual rotation. All ignition harness leads were securely attached to their respective magneto towers.

All engine compartment fuel lines were found to be se...