N350AR

Substantial
None

PIPER PA 46-350PS/N: 4622109

Accident Details

Date
Tuesday, February 11, 2014
NTSB Number
CEN14LA138
Location
Marion, IA
Event ID
20140213X02400
Coordinates
42.029392, -91.580513
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

The pilot’s failure to attain a touchdown on the runway’s hard surface, which resulted in a loss of directional control.

Aircraft Information

Registration
Make
PIPER
Serial Number
4622109
Engine Type
Reciprocating
Year Built
1990
Model / ICAO
PA 46-350PM600
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
6
FAA Model
PA 46-350P

Registered Owner (Current)

Name
ABODE CONSTRUCTION INC
Address
3405 7TH AVE STE 102
City
MARION
State / Zip Code
IA 52302-3787
Country
United States

Analysis

On February 10, 2014, at 1630 central standard time, a Piper PA 46-350P, N350AR, veered off the runway and impacted a snow bank during landing at Marion Airport (C17), Marion, Iowa. The airplane sustained substantial damage to the firewall. The pilot and passenger were uninjured. The airplane was registered to Adobe Construction Inc. and operated by the pilot under 14 CFR Part 91. The flight was operating on an instrument rules flight plan. Visual meteorological conditions prevailed at the time of the accident. The flight originated from Page Field Airport (FMY), Fort Myers, Florida and was destined to C17.

The pilot stated that he flew a 3-mile final visual approach to runway 35 (3,775 x 100 feet, asphalt/turf), which was "mostly fry with patchy compacted snow." When the nose wheel touched down during landing, there was a "violent pulling" to the left. The pilot applied right rudder/right brake but was unable to keep the airplane from veering left and into a 2-foot high snow bank that was located several feet off the runway.

Photos of runway 35 showed that a mark consistent with a path made by a landing gear wheel traversed off the right side of the runway's asphalt surface and through a snow-covered gravel edge. This mark within the snow was paralleled by a skid mark on the asphalt surface. Both marks then curved as skid marks off the left side of the runway and into a snow bank where the airplane rested with a collapsed nose wheel landing gear.

Fractured pieces from the nose landing gear actuator attachment area of the engine mount were optically examined in the National Transportation Safety Board Materials Laboratory. The examinations revealed features and deformation pattern on the multiple fractures that were consistent with overstress separations. No indications of pre-existing cracking or corrosion were observed.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CEN14LA138