N507CF

HISTORY OF FLIGHTOn July 17, 2014, at 0142 mountain daylight time, an Agusta A109E helicopter, N507CF, collided with a mesa near Newkirk, New Mexico. The commercial pilot, flight nurse, and paramedic were fatally injured. A postimpact fire ensued and the helicopter was destroyed. The helicopter was registered to and operated by TriState CareFlight LLC under the provisions of 14 Code of Federal Regulations Part 91 as a positioning flight. Night visual meteorological conditions existed for the helicopter's departure and a company visual flight rules flight plan was filed. The flight originated from the Santa Fe Municipal Airport (SAF), Santa Fe, New Mexico, at 0051 and was en route to a hospital in Tucumcari, New Mexico.

The helicopter was the subject of an alert notice and was found by a local resident. The helicopter wreckage came to rest on the north side of a mesa about 150 ft above the surrounding terrain. A postimpact fire consumed a majority of the fuselage. All main airframe and engine components were accounted for at the accident site. PERSONNEL INFORMATIONThe pilot, age 46, held a commercial pilot certificate for helicopter and instrument helicopter. He also held a flight instructor certificate for helicopter and instrument helicopter. On September 17, 2013, the pilot was issued a second class medical certificate with the limitation that he must wear corrective lenses.

The pilot was hired by TriState CareFlight (TSCF) on September 10, 2009. During his employment with TSFC, he began flying Agusta 119 helicopters, before being transferred to Eurocopter AS350 helicopters. On December 13, 2012, he was assigned the duties of pilot in command of Agusta A109 helicopters. Using data from TSCF and the pilot's annual resume, it was estimated that he accumulated about 6,167 total hours, with 208 hours in Agusta A109 helicopters, over 410 hours of night time, 75 hours of simulated instrument conditions, and 0 hours of actual instrument conditions. The pilot had been operating out the of the Santa Fe base for over a year and a half and had been flying in the mountainous desert environment of Arizona, Nevada, and New Mexico since his hire in 2009. He had flown numerous flights in the Santa Fe and Tucumcari areas prior to the accident.

The most recent check flight for the pilot was accomplished on December 16, 2013. It was a combined 14 CFR Part 135.293 and 135.299 check flight. The flight lasted 1.2 hours, was flown completely under night vision goggle (NVG) use, and some of the maneuvers flown and evaluated included: normal operations, emergency operations, unusual attitude recovery, inadvertent instrument flight rules (IFR) procedures, and NVG failure in flight. Astrological conditions for that training flight would have included clear skies with a bright moon at 100% disk illumination.

The pilot was qualified to fly using NVGs. At the time of the accident he had accrued at least 162 hours of flight assisted by NVGs. His last recurrent NVG training flight was on December 16, 2013, with ground training accomplished that day. The pilot inspected and tested his NVGs on July 16 and reported no discrepancies on the company's NVG Sign-Off Sheet. In the 90 days prior to the accident, he had flown 8.3 hours of NVG time:

Date Hours

April 23, 2014 0.4

April 25 2.4

April 27 1

May 22 2.6

May 26 1

May 27 0.2

June 18 1.1

June 19 0.6

July 16 0.8

The pilot normally worked a schedule that consisted of 7 days on-call and 7 days off-call. Prior to the accident, the pilot had been on-call for 15 days. From July 2 to July 8, the pilot was on-call between 0700 until 1900. The pilot was then given 24 hours off and then on July 9, was on-call between 1900 until 0700. The accident occurred on the pilot's eighth consecutive shift. Prior to the accident flight he had previously flown 0.6 hours on that same shift. AIRCRAFT INFORMATIONThe Agusta A109E helicopter was manufactured in 2000 and had been modified for helicopter air ambulance (HAA) flight operations. It was powered by twin Pratt & Whitney Canada PW206C turbo shaft engines each rated at 549 horsepower. The helicopter was certified for instrument flight rules operations. The last inspection, completed on July 4, 2014, was an approved aircraft inspection program which combined the 25 hour, 50 hour, and 150 hour inspections. After that date, the helicopter flew 17.3 hours with 2 discrepancies. On July 7, the accident pilot reported weak wheel brakes which were replaced that day. On July 11, the accident pilot reported a transmission oil chip light illumination. After the flight, maintenance cleaned "slight fuzz" from the chip detectors and returned the helicopter to service.

The helicopter was equipped with a Garmin GNS-530 GPS/NAV/COM, a SkyConnect Transceiver, and a panel mounted Garmin GPSmap 396. The cockpit was modified for NVG use via a supplemental type certificate. In addition, the helicopter was equipped with an enhanced ground proximity warning system, auto flight system, and radar altimeter. METEOROLOGICAL INFORMATIONA weather study was conducted for the accident flight by an NTSB Senior Meteorologist. A review of the National Weather Service Surface Analysis Chart for 0000 mountain daylight time (MDT) found a fairly active surface environment with a surface trough located over the accident site at 0000 MDT. In addition, a stationary front was located south of the accident site and three areas of low pressure were located to the distant northwest, south, and southeast of the accident site. Potential existed for clouds and precipitation due to numerous lifting mechanisms around the accident site to include combined surface, low-level, and mid-level troughs. At 1845 on July 16, the Storm Prediction Center predicted a 15% chance of damaging thunderstorm wind or gusts of 50 knots within the vicinity of the accident site until 0600 on July 17.

A review of aviation weather reporting facilities in the vicinity of the accident flight, revealed that the helicopter likely had a southerly wind component until flying south to southeast of Las Vegas, New Mexico at which point the wind would have shifted to out of the northeast. In addition, cloud ceiling would have lowered as the flight proceeded towards Tucumcari. An upper air sounding indicated the potential for cloud formations between 5,000 and 8,000 ft mean sea level (msl), with the possibility of rain showers and thunderstorms. Additionally, the sounding indicated the strongest wind speeds possible with a microburst or outflow boundary would have been between 45 to 53 mph. A potential for low-level wind shear was identified between 5,000 and 6,000 ft msl with clear air turbulence from the surface to 10,000 ft msl.

The closest Doppler radar site was located at Cannon Air Force Base (FDX), located 43 miles southeast of the accident site. Scans initiated between 2124 MDT on July 16 through 0235 MDT on July 17, revealed two distinct features before, during, and after the accident time. First, an outflow boundary moved from east to west across New Mexico from 2124 MDT to 0030 MDT. As the outflow boundary moved from east to west, the surface wind direction switched from southerly to northeasterly, concurrent with the aviation weather reporting facilities. Next, another outflow boundary and wave pattern was detected on the 0235 scan but due to Doppler beam angle and distance to the accident site was likely masked on the earlier scan. Backwards trajectory analysis was completed to map the progression of the outflow boundaries. Mapping estimated that the first outflow boundary and associated convective activity would have been over the accident site at the accident time. This would have increased the potential for increased wind shear, strong updrafts and downdrafts, reduced ceilings, and reduced visibility.

Airmen's Meteorological Information (AIRMET) Sierra, issued at 2045 MDT on July 16 and valid at the accident time for the accident site and route of flight, forecasted instrument meteorological conditions for the accident site with ceilings below 1,000 ft and visibility below 3 miles with precipitation and mist.

The terminal aerodrome forecast (TAF) for Tucumcari, located 32 miles east of the accident site, issued at 2334 MDT on July 16 forecasted wind from 030 degrees at 11 knots, prevailing visibility 6 miles, rain showers in the vicinity, few clouds at 2,000 ft agl and a broken ceiling at 8,000 ft agl.

The phase of the Moon was waning gibbous with 65% of the Moon's visible disk illuminated. At the time of the accident there would have been no moon visible due to the mid- and low-level cloud cover that the accident flight was likely flying beneath. AIRPORT INFORMATIONThe Agusta A109E helicopter was manufactured in 2000 and had been modified for helicopter air ambulance (HAA) flight operations. It was powered by twin Pratt & Whitney Canada PW206C turbo shaft engines each rated at 549 horsepower. The helicopter was certified for instrument flight rules operations. The last inspection, completed on July 4, 2014, was an approved aircraft inspection program which combined the 25 hour, 50 hour, and 150 hour inspections. After that date, the helicopter flew 17.3 hours with 2 discrepancies. On July 7, the accident pilot reported weak wheel brakes which were replaced that day. On July 11, the accident pilot reported a transmission oil chip light illumination. After the flight, maintenance cleaned "slight fuzz" from the chip detectors and returned the helicopter to service.

The helicopter was equipped with a Garmin GNS-530 GPS/NAV/COM, a SkyConnect Transceiver, and a panel mounted Garmin GPSmap 396. The cockpit was modified for NVG use via a supplemental type certificate. In addition, the helicopter was equipped with an enhanced ground proximity warning system, auto flight system, and radar altimeter. WRECKAGE AND IMPACT INFORMATIONThe helicopter came to rest midway between the peak and the surrounding terrain of a 300-foot high m...