Summary
On May 04, 2016, a Grumman Acft Eng Cor-schweizer G 164B (N8400K) was involved in an incident near Iowa, LA. All 1 person aboard were uninjured. The aircraft sustained substantial damage.
The National Transportation Safety Board determined the probable cause of this incident to be: The pilot's failure to maintain directional control while landing with an inoperative right brake.
On May 4, 2016, about 1130 central daylight time, a Grumman G-164B airplane, N8400K, was substantially damaged during landing at the O'Brien Flying Service Airport (LA71), Ames, Louisiana. The pilot was not injured. The airplane was registered to and operated by O'Briens Flying Service, Inc., under the provisions of 14 Code of Federal Regulations Part 137 as an aerial spraying flight. Day visual meteorological conditions prevailed for the flight, with no flight plan filed. The local flight departed a private airport about 1110.
The pilot stated he had been conducting spray operations since 0730. While landing at a private (satellite) airport, he noticed the right brake was not operating.
This incident is documented in NTSB report CEN16LA173. AviatorDB cross-references NTSB investigation data with FAA registry records to provide comprehensive safety information for aircraft N8400K.
Accident Details
Probable Cause and Findings
The pilot's failure to maintain directional control while landing with an inoperative right brake.
Aircraft Information
Registered Owner (Current)
Analysis
On May 4, 2016, about 1130 central daylight time, a Grumman G-164B airplane, N8400K, was substantially damaged during landing at the O'Brien Flying Service Airport (LA71), Ames, Louisiana. The pilot was not injured. The airplane was registered to and operated by O'Briens Flying Service, Inc., under the provisions of 14 Code of Federal Regulations Part 137 as an aerial spraying flight. Day visual meteorological conditions prevailed for the flight, with no flight plan filed. The local flight departed a private airport about 1110.
The pilot stated he had been conducting spray operations since 0730. While landing at a private (satellite) airport, he noticed the right brake was not operating. The pilot executed a go-around and diverted to LA71, based on his desire to land on a longer/wider runway. While landing on Runway 3, the airplane drifted left during rollout. The pilot applied full engine power in an unsuccessful attempt to correct to centerline. The airplane subsequently impacted a fence, which damaged both wings.
Examination by Federal Aviation Administration (FAA) inspectors revealed a failure of the right main landing gear hydraulic fluid line, which occurred at the b-nut for the engine cowl feed through fitting. The part number for the failed line was "Right Hand Tube Assembly, P/N A2526-4".
Data Source
Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CEN16LA173