N425AE

Destroyed
Fatal

GRUMMAN AMERICAN AVN. CORP. AA-5BS/N: AA5B0487

Accident Details

Date
Saturday, April 1, 2017
NTSB Number
ERA17FA143
Location
Edgewater, FL
Event ID
20170401X94926
Coordinates
28.959444, -80.957221
Aircraft Damage
Destroyed
Highest Injury
Fatal
Fatalities
2
Serious Injuries
0
Minor Injuries
0
Uninjured
0
Total Aboard
2

Probable Cause and Findings

The Cessna pilot's failure to maintain clearance from the Grumman during the transition to a different formation. Contributing to the accident was the stepped down configuration of the formation flight which was composed of dissimilar aircraft.

Aircraft Information

Registration
N425AE
Make
GRUMMAN AMERICAN AVN. CORP.
Serial Number
AA5B0487
Engine Type
Reciprocating
Year Built
1977
Model / ICAO
AA-5BAA5
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
ANNIES THINGS LLC
Address
112 N SENTOSA LAKE RD
Status
Deregistered
City
TYGH VALLEY
State / Zip Code
OR 97063-9758
Country
United States

Analysis

HISTORY OF FLIGHTOn April 1, 2017, about 0846 eastern daylight time, a Cessna 170B, N8082D, and a Grumman American AA-5B, N425AE, were destroyed during an in-flight collision over Edgewater, Florida. The airline transport pilot flying the Cessna and the airline transport pilot flying the Grumman were fatally injured. Both airplanes were owned and operated by their respective pilots as Title 14 Code of Federal Regulations (CFR) Part 91 personal flights. No flight plans were filed, and visual meteorological conditions prevailed at the time of the accident. The airplanes were part of a recreational formation flight that departed from Spruce Creek Airport (7FL6), Daytona Beach, Florida, about 0839 and were destined for Arthur Dunn Airpark (X21), Titusville, Florida.

Three other airplanes were part of the formation flight: a Great Lakes biplane, a Grumman AA-1C (referred to in this report as the Lynx), and an American Champion 8KCAB (referred to in this report as the Super Decathlon). All five pilots participating in the formation flight were members of a pilot group based at 7FL6. On the morning of the accident, the group members were flying to X21 to attend a monthly breakfast event.

The five-airplane formation flight took off from 7FL6. The flight leader was flying the biplane, which took off with the accident Grumman in formation first; the accident Cessna and the Lynx took off in formation next followed by the Super Decathlon. The flight initially formed into a five-airplane "V" formation (see figure 1), with the biplane at the apex, the Grumman in the No. 2 position (to the left and aft of the biplane), the Cessna in the No. 3 position (to the right and aft of the biplane), the Lynx in the No. 4 position (to the right and aft of the Cessna), and the Super Decathlon in the No. 5 position (to the left and aft of the Grumman).

Figure 1 – Example of a 5-airplane "V" formation (aircraft pictured not representative of those involved in this accident).

The formation flight then turned south toward X21. Due to the position of the sun, the flight leader decided to change to a left echelon formation (see figure 2), which would have allowed the pilots to avoid the sun glare. In the left echelon formation, the airplanes would be arranged diagonally to the left of the biplane, with each airplane positioned slightly lower than (stepped down), behind, and to the left of the airplane ahead. This formation would require the Cessna and the Lynx to transition across the formation from right to left behind the leader. The Grumman would remain in the No. 2 position to the left and aft of the leader; the Cessna, in the No. 3 position, would be to the left and aft of the Grumman; the Lynx, in the No. 4 position, would be to the left and aft of the Cessna; and the Super Decathlon, in the No. 5 position, would be to the left and aft of the Lynx.

Figure 2 – Example of a 5-airplane echelon left formation (aircraft pictured not representative of those involved in this accident).

According to the flight leader, moments after he commanded the Cessna and the Lynx to transition across the formation to the left, he saw at his 7:00 position a "flash" of something white that looked like the bottom of an airplane.

According to the pilot of the Lynx, when the flight leader commanded his airplane and the Cessna to transition to the left, he heard the flight leader state "cleared to cross," and he observed the Cessna start to move to the left "slow and normal." The Lynx pilot stayed with the Cessna, and, when the Cessna was almost on the left echelon bearing line, he saw the airplane move into position behind the Grumman. The Lynx pilot then suddenly saw "parts" coming toward him on his airplane's right side along with what appeared to be "vapor." The Lynx pilot also saw the Grumman abruptly pitch up and go past him above and to the right of his airplane. The Lynx pilot stated that the Grumman looked as if it was entering a loop because the airplane's nose was already past vertical and he could see the top of the airplane. He observed something on the right side of the Cessna move upward before the Cessna's tail began to "slew left," and then the Cessna disappeared from his view.

The biplane and the Lynx then broke formation, with the biplane immediately pulling up and turning hard left and the Lynx entering a 60° left bank. The flight leader could see airplane parts falling to the ground and the Cessna descending "like a falling leaf maneuver" with what appeared to be the airplane's right wing folded over. The flight leader then began to circle the accident site and reported the accident to an air traffic controller at New Smyrna Beach Municipal Airport, (EVB), New Smyrna Beach, Florida. Afterward, the flight leader continued to circle the accident site until emergency responders arrived.

Witnesses who were driving on Interstate 95 (I-95) saw the formation flight traveling southbound. They observed that the formation flight was about 1/4 mile west of I-95 when the collision occurred, and they observed part of the wing on one airplane come off and the airplane tumble and rapidly descend tail low until it descended behind a tree line. They also saw the other airplane descend rapidly, almost straight down, until losing sight of it. Further, the witnesses saw parts from both airplanes descend to the ground, with one piece landing in the median between the northbound and southbound lanes of I-95.

The Cessna and the Grumman were equipped with handheld GPS units. The GPS device in the Grumman was impact damaged, and data were unable to be extracted using normal means. The data extracted from the GPS device in the Cessna, a Garmin Aera 510, included data from the day of the accident starting at 0743:55.

According to the GPS data, on the day of the accident, the Cessna took off from runway 23 about 0839:38 and began a turn to the left. Upon reaching the end of the runway, the Cessna was at a GPS altitude of 202 ft. The Cessna flew over residences at a GPS altitude of 220 ft and continued turning until it was on a ground track of about 142°. For about the next 2 miles, the airplane climbed slowly, reaching a GPS altitude of 634 ft at 0841:15. The Cessna continued to climb and, about 7.8 miles later, at 0846:13, the GPS data indicated that the airplane had begun to descend rapidly to the ground near the location of the accident site.

The pilot of the Lynx provided a screenshot from his GPS unit to assist the National Transportation Safety Board (NTSB) in determining the route of flight for the formation flight. A comparison of the GPS data from the Lynx and the Cessna indicated that both airplanes had flown the same route of flight. PERSONNEL INFORMATIONAccording to Federal Aviation Administration (FAA) records, the pilot of the Cessna held an airline transport pilot certificate with a rating for airplane multiengine land and commercial privileges for airplane single-engine land. He also held a flight instructor certificate with ratings for airplane single-engine, airplane multiengine, and instrument airplane; a flight engineer certificate with a rating for flight engineer turbojet powered; and a mechanic certificate with airframe and powerplant ratings. He also held type ratings for the Boeing 737, 757, 767, and 777 and the Beechcraft 1900 and 300. His most recent FAA first-class medical certificate was issued on February 10, 2017, with no limitations. He had accrued about 24,237 hours total flight experience as of March 2017.

According to FAA records, the pilot of the Grumman held an airline transport pilot certificate with a rating for airplane multiengine land and commercial privileges for airplane single-engine land and airplane single-engine sea. She also held a flight instructor certificate with ratings for airplane single-engine, airplane multiengine, and instrument airplane; a flight engineer certificate with a rating for flight engineer turbojet powered; and a ground instructor certificate with ratings for advanced and instrument. In addition, she held type ratings for the Airbus A-330; Boeing 747, 757, and 767; Beechcraft 1900; and Cessna 510S. Her most recent FAA first-class medical certificate was issued on October 19, 2016, with no limitations. She had accrued about 11,368 hours total flight experience as of March 2016. AIRCRAFT INFORMATIONCessna 170B

The Cessna 170B was a four-seat, tailwheel-equipped, strut-braced, high-wing airplane. It was powered by a 6-cylinder, air-cooled, 145-horsepower Continental O-300-A engine that drove a 2-bladed McCauley fixed-pitch propeller.

According to FAA and maintenance records, the airplane was manufactured in 1952. Its most recent annual inspection was completed on October 1, 2016. At the time of the inspection, the airplane had accrued a total of 4,596.8 hours of operation.

Grumman American AA-5B

The Grumman American AA-5B was a four-seat, nosewheel-equipped, fully cantilevered, low-wing airplane. It was powered by a 4-cylinder, air-cooled, 180-horsepower Lycoming O-360-A4K engine that drove a 2-bladed Sensenich fixed-pitch propeller.

According to FAA and maintenance records, the Grumman was manufactured in 1977. Its most recent annual inspection was completed on September 1, 2016. At the time of the inspection, the airplane had accrued a total of 1,673.4 hours of operation. METEOROLOGICAL INFORMATIONAt 0847 (1 minute after the accident), the recorded weather at EVB, which was located 6 nautical miles north of the accident site, included wind from 260° at 6 knots, visibility 10 miles, scattered clouds at 5,000 ft, temperature 20°C, dew point 17°C, and an altimeter setting of 30.02 inches of mercury.

According to the US Naval Observatory, at 0840 (6 minutes before the accident) in the area of the accident location, the altitude of the sun was 18.2° above the horizon, and the azimuth of the sun was 94.7° east of north. AIRPORT INFORMATIONCessna 170B

The Cessna 170B was ...

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# ERA17FA143