N62JN

HISTORY OF FLIGHTOn July 1, 2017, at 1603 central daylight time, a Flight Design CTSW light sport airplane, N62JN, collided with terrain while landing at Monticello Regional Airport (MXO), Monticello, Iowa. The commercial pilot was fatally injured, his dog sustained minor injuries, and the airplane was substantially damaged. The airplane was owned by Mooney of Monticello, Inc., and was being operated by the pilot under the provisions of Title 14 Code of Federal Regulations Part 91. Day visual meteorological conditions prevailed near the accident site, and no flight plan was filed for the local personal flight, which departed MXO about 1506.

A witness, who was practicing takeoffs and landings on runway 27 at MXO, reported that he saw the accident airplane approaching the airport from the east. The witness transmitted on the common traffic advisory frequency that he was on short final approach to runway 27. The accident pilot asked the witness if he was landing or departing. The witness replied that he was going to conduct a touch-and-go landing on runway 27. The witness stated that, after completing his touch-and-go landing, he announced that he was turning onto the downwind leg for runway 27. The accident pilot replied that he was aborting his landing approach. The witness stated that he and the accident pilot subsequently confirmed seeing each other east of the airport at pattern altitude. The witness continued in the traffic pattern and conducted another touch-and-go landing on runway 27. The witness stated that, while on the next downwind leg, he observed the accident airplane on a final approach to runway 27. The witness transmitted that he would extend his downwind to increase spacing between the two airplanes. The accident pilot replied that he was on final approach for a full-stop landing on runway 27. The witness subsequently lost visual contact with the accident airplane as he turned his airplane onto the base leg. The witness did not see the accident airplane on the runway or taxiway after he turned onto final approach. The witness conducted a go-around and then saw the accident airplane in a cornfield adjacent to the runway.

Data from the airplane's engine monitor, which included the final 41 minutes 32 seconds of flight, indicated that, at 1603:34, the airplane crossed the runway 27 threshold, and the ground speed and engine speed had decreased from 46.8 knots and 2,188 rpm to 35.6 knots and 2,000 rpm, respectively. At 1603:37, about 163 ft past the runway 27 threshold, the airplane turned right away from the runway. At that time, the ground speed had decreased to 34.1 knots, but the engine speed had increased to 4,343 rpm. The final data point was recorded at 1603:41, when the airplane was about 160 ft north of the runway centerline and still turning right. The final data point indicated a ground speed of 41.3 knots, an engine speed of 4,833 rpm (takeoff power), a fuel flow of 3.125 gallons per hour, and that there were 12.9 gallons of fuel remaining.

Surface wind data and data from the airplane's electronic engine monitor were used to calculate the airplane's airspeed during the approach. The surface wind at the time of the accident was from 280° at 13 knots, which would have resulted in airspeeds about 12.8 knots higher than the recorded ground speeds while the airplane was on final approach to runway 27. At 1603:34, the airplane crossed the runway threshold at a calculated airspeed of 48.4 knots. At 1603:37, the airplane turned right away from the runway heading at a calculated airspeed of 46.9 knots. At 1603:41, the airplane's heading was 357°, and it had a calculated airspeed of 44.1 knots. A review of the recorded data did not reveal any anomalies with engine operation during the flight.

After the accident, the witness saw the pilot's dog, who had been onboard the airplane, running out of the cornfield where the airplane had crashed. First responders were able to catch the dog, who was treated for minor injuries by a local veterinarian. PERSONNEL INFORMATIONAccording to Federal Aviation Administration (FAA) records, the 90-year-old pilot held a commercial pilot certificate with airplane single-engine land, airplane multiengine land, and instrument airplane ratings. His last aviation medical examination was on August 14, 2014, when he was issued a third-class medical certificate with the limitation that he must wear corrective lenses. On the application for his medical certificate, the pilot reported having accumulated 7,450 hours of total flight experience, of which 30 hours were flown within the previous 6 months. The medical certificate expired on August 31, 2016; however, federal regulations only required the pilot to possess a valid driver's license to operate the light sport airplane. According to local law enforcement, the pilot had a valid Iowa driver's license. A search of FAA records showed no previous accidents, incidents, or enforcement proceedings.

A comprehensive pilot logbook was not located during the investigation. An airplane use log recovered from the wreckage was used to calculate the pilot's recent flight experience. According to the airplane use log, he had flown 40.9, 16.8, 10.6, and 5.4 hours during the 1 year, 6 months, 90 days, and 30 days before the accident, respectively. The accident flight was about 57 minutes and was the only flight conducted within 24 hours of the accident. AIRCRAFT INFORMATIONThe two-seat light sport airplane, serial number 06-01-09, manufactured in 2006, was a high-wing monoplane constructed of primarily carbon-fiber reinforced plastic. The airplane was powered by a 100-horsepower, 4-cylinder, Rotax 912 ULS reciprocating engine, serial number 5.645.807. The engine provided thrust through a fixed-pitch, three-blade, Neuform model CR3-65-47-101.6 propeller. The airplane was equipped with fixed-tricycle landing gear, wing flaps, and had a maximum gross weight of 1,323 pounds. The FAA issued the light sport airplane a special airworthiness certificate and associated operating limitations on March 29, 2006.

The airplane's hour meter indicated 664.25 hours at the accident site. At the time of the accident, the airframe, engine, and propeller had accumulated 664.25 total service hours. The engine had accumulated 225.25 hours since being overhauled on October 25, 2012. The last condition inspection of the airplane was completed on October 18, 2016, at 636.3 total airframe hours. Postaccident review of the maintenance records found no history of unresolved airworthiness issues.

According to the airplane's Pilot's Operating Handbook, the wings-level aerodynamic stall speed with flaps retracted (0°) and flaps fully extended (40°) is 42 and 39 knots, respectively. The minimum and maximum continuous engine speed for takeoff is 4,500 and 5,500 rpm, respectively. METEOROLOGICAL INFORMATIONA postaccident review of available meteorological data established that day visual meteorological conditions prevailed at the accident site. At 1555, about 8 minutes before the accident, the MXO automated surface observing system reported wind from 280° at 13 knots, 10 miles surface visibility, few clouds at 5,500 ft above ground level, temperature 24°C, dew point 13°C, and an altimeter setting of 29.98 inches of mercury. AIRPORT INFORMATIONThe two-seat light sport airplane, serial number 06-01-09, manufactured in 2006, was a high-wing monoplane constructed of primarily carbon-fiber reinforced plastic. The airplane was powered by a 100-horsepower, 4-cylinder, Rotax 912 ULS reciprocating engine, serial number 5.645.807. The engine provided thrust through a fixed-pitch, three-blade, Neuform model CR3-65-47-101.6 propeller. The airplane was equipped with fixed-tricycle landing gear, wing flaps, and had a maximum gross weight of 1,323 pounds. The FAA issued the light sport airplane a special airworthiness certificate and associated operating limitations on March 29, 2006.

The airplane's hour meter indicated 664.25 hours at the accident site. At the time of the accident, the airframe, engine, and propeller had accumulated 664.25 total service hours. The engine had accumulated 225.25 hours since being overhauled on October 25, 2012. The last condition inspection of the airplane was completed on October 18, 2016, at 636.3 total airframe hours. Postaccident review of the maintenance records found no history of unresolved airworthiness issues.

According to the airplane's Pilot's Operating Handbook, the wings-level aerodynamic stall speed with flaps retracted (0°) and flaps fully extended (40°) is 42 and 39 knots, respectively. The minimum and maximum continuous engine speed for takeoff is 4,500 and 5,500 rpm, respectively. WRECKAGE AND IMPACT INFORMATIONThe accident site was in a cornfield located adjacent to runway 27. All the airplane's major structural components and flight controls were accounted for at the accident site. The wreckage debris path and airplane damage were consistent with the airplane impacting the ground in a right-wing-down, nose-down pitch attitude while on a north-northeast heading. The initial point-of-impact (POI) was about 250 ft north of the runway centerline where fragments of the right wing tip were found. A propeller slash mark in the terrain and several fragments of a propeller blade were found about 24 ft northeast of the initial POI. The main wreckage, which consisted of the fuselage, left wing, empennage, and engine, was located 54 ft northeast of the initial POI. The fuselage was found inverted, and the cockpit's primary structure was heavily fragmented. The entire right wing had separated from the fuselage. The left wing remained partially attached to the fuselage.

First responders reported that fuel was leaking from the left wing root. Both cockpit flight control sticks were found installed. Flight control continuity to the ailerons could not be established due to impact damage; however, all observed separations were...