Accident Details
Probable Cause and Findings
The pilot's failure to see and avoid power lines while maneuvering at low altitude.
Aircraft Information
Registered Owner (Current)
Analysis
The helicopter pilot reported that, during an aerial application flight, he performed a "high recon [reconnaissance]" pass over the field and observed houses, tree lines, and power lines surrounding the field. He added that he descended for the first pass, about 70 mph and 100 to 150 ft. above ground, and as he approached the end of the field, he "suddenly became aware of two [additional] large power lines stretched out in front of [him] at eye level and closing fast." He further added that, he "instinctively pulled up on the collective and back on the cyclic" and the fuselage cleared the wire, but suddenly there was a "violent lurch" when the tail rotor contacted the wire. Subsequently, the helicopter started to "spin out of control," the pilot braced for impact, and the helicopter impacted the terrain.
The fuselage, tail boom, and main rotor sustained substantial damage.
The pilot reported that there were no preaccident mechanical malfunctions or failures with the helicopter that would have precluded normal operation.
Data Source
Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# GAA17CA491