N787SH

Destroyed
Fatal

Robinson R22S/N: 3627

Accident Details

Date
Saturday, June 30, 2018
NTSB Number
CEN18FA244
Location
Sterling City, TX
Event ID
20180630X11119
Coordinates
31.860000, -101.086112
Aircraft Damage
Destroyed
Highest Injury
Fatal
Fatalities
1
Serious Injuries
0
Minor Injuries
0
Uninjured
0
Total Aboard
1

Probable Cause and Findings

A loss of control during the landing approach for reasons that could not be determined based on the available information.

Aircraft Information

Registration
N787SH
Make
ROBINSON
Serial Number
3627
Engine Type
Reciprocating
Year Built
2004
Model / ICAO
R22R22
Aircraft Type
Rotorcraft
No. of Engines
1

Registered Owner (Historical)

Name
CONCHO AVIATION LLC
Address
PO BOX 747
Status
Deregistered
City
STERLING CITY
State / Zip Code
TX 76951-0747
Country
United States

Analysis

HISTORY OF FLIGHTOn June 29, 2018, about 2010 central daylight time, a Robinson R22B, N787SH, was destroyed when it was involved in an accident near Sterling, Texas. The pilot was fatally injured. The helicopter was operated as a Title 14 Code of Federal Regulations Part 91 work use flight.

The purpose of the flight was to inspect a nearby stock water tank and inoperative water pump. The pilot had completed the flight and was returning to land on the helicopter's trailer when the accident occurred.

A witness, who was located at the home base, stated that she saw the helicopter make an approach to land on the trailer, but the pilot aborted the landing, and the helicopter backed away from the trailer and climbed. The helicopter then began "a violent spin" as it climbed to 20 to 25 ft above the ground. The helicopter spun 4 or 5 times, then the witness heard a loud noise like an engine backfire and the helicopter "fell" to the ground. She could not recall whether she heard the engine producing power following the backfire noise. The witness stated that she thought the spin was in the counterclockwise direction but was not positive. She did not see the impact because of building obstructions. The engine was not running when she reached the helicopter. AIRCRAFT INFORMATIONThe helicopter was configured with a single set of flight controls (pedals, collective, and cyclic) at the right seat. The left seat pilot controls were not installed, and the cover plate for the removed left pedal assembly was not installed. The operator stated that the helicopter was routinely used in cattle roundup and predator mitigation operations. The helicopter had flown a previous flight of about 3.7 hours on the morning of the accident. The pilot who conducted that flight did not report any anomalies with the helicopter. METEOROLOGICAL INFORMATIONA company pilot reported that the wind was about 10-12 knots from the south about the time of the accident. AIRPORT INFORMATIONThe helicopter was configured with a single set of flight controls (pedals, collective, and cyclic) at the right seat. The left seat pilot controls were not installed, and the cover plate for the removed left pedal assembly was not installed. The operator stated that the helicopter was routinely used in cattle roundup and predator mitigation operations. The helicopter had flown a previous flight of about 3.7 hours on the morning of the accident. The pilot who conducted that flight did not report any anomalies with the helicopter. WRECKAGE AND IMPACT INFORMATIONThe accident site was located about 200 ft from its intended landing site on the transport trailer. The helicopter impacted level terrain and came to rest on its right side. There was no evidence of contact with obstructions during the approach. The fuselage sustained impact damage to its lower right side. Both pilot and passenger doors were not installed. Three ammunition cans containing tools and several loose shotgun shells (discharged and undischarged) were present within the wreckage area. Several shotgun shells were recovered from the left floor area, the belly area, and in the debris field. One shotgun shell had a dent in the plastic shell.

Examination of the airframe and engine did not reveal any pre-impact mechanical anomalies. Flight control continuity was confirmed from the cockpit to the flight control surfaces.

The ammunition boxes were placed on the left side cockpit floor to observe the geometry of the boxes in relation to the removed left pedal assembly. The edge of the most-forward box covered the top of the left side pedal receiver when the right pedal was positioned aft of neutral. Due to impact damage the position of the ammunition boxes and dented shotgun shell during the flight could not be determined.

Detailed airframe and engine examination findings are included in the public docket for this accident. MEDICAL AND PATHOLOGICAL INFORMATIONSouth Plains Forensic Pathology, Lubbock, Texas, performed an autopsy of the pilot. The pilot's cause of death was multiple blunt force injuries.

The FAA's Forensic Sciences Laboratory performed toxicology testing on the pilot's tissue samples. The toxicology tests were negative for drugs and ethanol. Small amounts of over-the-counter medicine for hay fever and allergies were present.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CEN18FA244