N369PA

Substantial
None

Guimbal CABRIS/N: 1109

Accident Details

Date
Thursday, May 23, 2019
NTSB Number
GAA19CA279
Location
St. Louis, IL
Event ID
20190524X15229
Coordinates
38.570278, -90.154998
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

The flight instructor's improper emergency procedure instruction to the student pilot, which resulted in the student improperly using the throttle to correct the loss of yaw control, which resulted in ground impact and a dynamic rollover. 

Aircraft Information

Registration
N369PA
Make
GUIMBAL
Serial Number
1109
Engine Type
None
Year Built
2015
Model / ICAO
CABRIFK9
No. of Engines
0

Registered Owner (Historical)

Name
SALE REPORTED
Address
3800 NE THREE MILE LN
Status
Deregistered
City
MCMINNVILLE
State / Zip Code
OR 97128
Country
United States

Analysis

The helicopter flight instructor reported that, during a training flight, he briefed the student pilot on the procedures required to land with a simulated stuck left pedal. The student began a descent to enter a shallower-than-normal glide path to the runway surface, and he completed his final checks for the maneuver and continued the approach.

Upon contacting the runway, the helicopter veered to the left, and the instructor elected to abort the landing. As the helicopter lifted off, it began to yaw to the left at a rapid rate, while drifting to the left of the runway. Recognizing the helicopter was in a spin, they attempted to correct by leveling the helicopter "long enough for the aircraft to regain tail-rotor authority." The helicopter's left skid impacted the mud on the left side of the runway and the helicopter rolled onto its left side.

The Federal Aviation Administration's Helicopter Flying Handbook, FAA-H-8083-21A, provides information and guidance in a section titled "Landing – Stuck Neutral or Right Pedal" which stated in part:

The landing profile for a stuck neutral or a stuck right pedal is a low-power approach terminating with a running or roll-on landing. The approach profile can best be described as a shallow to normal approach angle to arrive approximately 2–3 feet landing gear height above the intended landing area with a minimum airspeed for directional control.

During the approach the flight instructor directed the student pilot to "utilize throttle manipulation to control the yaw caused by a fixed input on the anti-torque system."

The manufactures service letter, SL 19-002 A, states, "During in-flight tail rotor control failure simulation, pilots should never use the twist grip to control yaw."

The helicopter sustained substantial damage to the main rotor, fuselage and tail-boom.

The flight instructor reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.

The automated weather observation station located on the airport reported that, about the time of the accident, the wind was variable at 4 knots.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# GAA19CA279