N153SA

Substantial
None

Bell OH-58AS/N: 68-16711

Accident Details

Date
Wednesday, May 20, 2020
NTSB Number
CEN20LA187
Location
West Branch, MI
Event ID
20200520X22054
Coordinates
44.215557, -84.188056
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

The pilot's failure to maintain rotor rpm during a precautionary autorotation, which resulted in a hard landing. Contributing to the accident was the airframe vibration for reasons that could not be determined because examination of the helicopter revealed no anomalies.

Aircraft Information

Registration
Make
BELL
Serial Number
68-16711
Engine Type
Turbo-shaft
Year Built
1968
Model / ICAO
OH-58A
Aircraft Type
Rotorcraft
No. of Engines
1
Seats
4
FAA Model
OH-58A

Registered Owner (Current)

Name
HODGES TERRY A
Address
1550 DRIFTWOOD CT
City
WEST BRANCH
State / Zip Code
MI 48661-9381
Country
United States

Analysis

On May 20, 2020, about 0933 eastern daylight time, an experimental exhibition category Bell OH-58A helicopter, N153SA, was substantially damaged when it was involved in an accident near West Bank, Michigan. The commercial pilot and passenger were not injured. The helicopter was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 personal flight.

The pilot told Federal Aviation Administration (FAA) inspectors that he and his passenger departed Peach Lake Heliport (89MI), his private heliport for a local flight to Midland, Michigan, to observe recent flood damage. During the return flight, at an altitude of about 500 ft above ground level, the pilot felt an airframe vibration, and he immediately entered a precautionary autorotation. He did not observe any caution or warning lights or horns associated with the vibration. The pilot made a 200° left turn to an open field, and after the helicopter cleared some trees during the approach, the low rotor rpm horn activated. The pilot reduced collective and made a hard run-on landing. The helicopter slid about 20 to 30 ft on its skids before it came to rest upright. The main rotor drooped, and one blade struck the tail boom, severing the tail rotor drive shaft; the underside of the tail boom also sustained impact damage.

The pilot could not describe to Federal Aviation Administration inspectors the location or frequency of the vibration, and the passenger reported that he felt no vibration. Postaccident and follow-up inspections by the pilot's mechanic found no evidence of the source of the vibration.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CEN20LA187