N7186K

Substantial
None

Robinson R22S/N: 3031

Accident Details

Date
Wednesday, July 8, 2020
NTSB Number
CEN20LA282
Location
Venice, LA
Event ID
20200713X11352
Coordinates
29.479999, -89.341667
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

A partial loss of engine power for reasons that could not be determined based on available evidence.

Aircraft Information

Registration
N7186K
Make
ROBINSON
Serial Number
3031
Engine Type
Reciprocating
Year Built
2000
Model / ICAO
R22R22
Aircraft Type
Rotorcraft
No. of Engines
1

Registered Owner (Historical)

Name
SALE REPORTED
Address
9275 ROAD 98
Status
Deregistered
City
PAULDING
State / Zip Code
OH 45879-9167
Country
United States

Analysis

On July 8, 2020, about 0945 central daylight time, a Robinson R-22 helicopter, N7186K, was substantially damaged when it was involved in an accident near Venice, Louisiana. The pilot was not injured. The helicopter was operated as a Title 14 Code of Federal Regulations Part 91 aerial observation flight.

The pilot was conducting an aerial survey about 30 ft above ground level (agl) when the engine lost partial power. He successfully autorotated to swampy terrain, where the left skid sunk into the ground, the helicopter settled to the left, and the main rotor blades impacted the ground. One main rotor blade was bent and the main rotor pitch links were damaged.

The helicopter was recovered and an engine run was conducted by a mechanic. The engine remained installed in the helicopter and the engine run was attempted using the battery and fuel that remained in the helicopter after the accident. The battery power was insufficient to start the engine, so the battery was replaced. The engine subsequently started and ran at idle power for several minutes before the mechanic advanced the throttle partially. He was unable to apply full throttle due to the condition of the wreckage. Once the engine power stabilized at the advanced power setting, he cycled the magneto switch from the “Both” position to the “Left” and “Right” positions. He reported the rpm decreased and stabilized each time the magneto switch was cycled to each position. The mechanic reported no anomalies during the engine run.

Weather conditions, as reported at the nearest reporting facility, were not conducive to the development of carburetor icing.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CEN20LA282