N29cf

MINR
Minor

CESSNA 207

Accident Details

Date
Monday, March 28, 1994
NTSB Number
ANC94IA049
Location
ANCHORAGE, AK
Event ID
20001206X00828
Coordinates
61.180038, -149.879974
Aircraft Damage
MINR
Highest Injury
Minor
Fatalities
0
Serious Injuries
0
Minor Injuries
1
Uninjured
3
Total Aboard
4

Probable Cause and Findings

THE PARTIAL FAILURE OF THE NO. 4 PISTON FROM OVER TEMPERATURE (DETONATION).

Aircraft Information

Registration
N29cf
Make
CESSNA
Engine Type
Turbo-shaft
Year Built
1976
Model / ICAO
207 C07T
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
SPERNAK AIRWAYS INC
Address
PO BOX 102255
Status
Deregistered
City
ANCHORAGE
State / Zip Code
AK 99510-2255
Country
United States

Analysis

On March 28, 1994, at 1420 Alaska daylight time, a wheel equipped Cessna 207 airplane, owned and operated by Spernak Airways, Inc., experienced a loss of engine power while in cruise flight. The airline transport certificated pilot-in-command performed an emergency landing on Sleeper Strip, a private strip located about 4 miles east of Anchorage, Alaska, that is not maintained during the winter. The pilot and his three revenue passengers were not injured and the airplane sustained minor damage. The 14 CFR Part 135 on demand flight last departed Merrill Field Airport, Anchorage, Alaska, at 1415 and the intended destination was Beluga, Alaska. Visual meteorological conditions prevailed and a company VFR flight plan was in effect.

The pilot-in-command told the NTSB investigator-in-charge during a personal interview that the airplane was in stabilized cruise flight at an altitude of approximately 1000 feet above the ground when the engine began to run rough and loose power to the point where he could no longer maintain altitude. There were no metallic sounds associated with the engine anomaly.

Examination of the engine, a Teledyne Continental IO-540-F, by the NTSB investigator-in-charge revealed substantial damage to the upper surface of the No. 4 cylinder. The cylinder and its associated connecting rod were forwarded to the NTSB's metallurgical laboratory in Washington, D.C. for examination and analysis. The metallurgist's factual report and analysis report are contained in the incident report package.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# ANC94IA049