N1184V

Substantial
None

BEECH 17 S/N: 6748

Accident Details

Date
Sunday, July 17, 1994
NTSB Number
CHI94LA235
Location
ELGIN, NE
Event ID
20001206X01703
Coordinates
41.980270, -98.080070
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

the pilot's failure to maintain clearance with the road sign. Factors in the accident were the sign and the failure of the landing gear to extend into the full down and locked position.

Aircraft Information

Registration
Make
BEECH
Serial Number
6748
Engine Type
Reciprocating
Year Built
1944
Model / ICAO
17 BE17
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
5
FAA Model
D17S

Registered Owner (Current)

Name
GROSSBERG MICHAEL J
Address
50 OCEAN BREEZE DR
City
ATLANTIC BEACH
State / Zip Code
FL 32233-5953
Country
United States

Analysis

On July 17, 1994, at 1020 central daylight time, a Beech 17, N1184V, sustained substantial damage when it struck a sign during an aborted landing at a private airstrip in Elgin, Nebraska. The commercial pilot landed the airplane on an adjacent field. The pilot reported he elected to abort the landing because he was unable to fully extend the airplane's landing gear. Neither the pilot, nor his sole passenger were injured. The 14 CFR Part 91 personal flight originated in Columbus, Nebraska, without flight plan. Visual meteorological conditions prevailed at the time of the accident.

According to the pilot, he lowered the landing gear in preparation to land while on the downwind leg at Elgin. All indications were normal. When he flared the airplane for touchdown, the pilot realized that the airplane was settling closer to the ground then normal. He elected to go around and added full power. While climbing, the airplane's right wing struck a road sign which was located at the west end of the runway. The airplane landed on a field approximately 100 feet from the runway with the gear partially extended.

A postaccident examination of the airplane was performed by the FAA. A complete retraction check on the landing gear could not be done due to the severity of the damage to the gear retraction system. The landing gear motor was operated in both directions by selecting the landing gear selector in both the up and down positions. During the test, the landing gear motor did stop twice without any external influence.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CHI94LA235