N41870

Substantial
Minor

BELL UH-1B S/N: 65-12853

Accident Details

Date
Thursday, September 29, 1994
NTSB Number
ATL94LA180
Location
OZARK, AL
Event ID
20001206X02183
Coordinates
31.430620, -85.640808
Aircraft Damage
Substantial
Highest Injury
Minor
Fatalities
0
Serious Injuries
0
Minor Injuries
1
Uninjured
1
Total Aboard
2

Probable Cause and Findings

THE FAILURE OF THE ENGINES' MAIN BEARINGS BECAUSE OF A LACK OF LUBRICATION. A FACTOR WAS THE HEAVILY WOODED TERRAIN.

Aircraft Information

Registration
N41870
Make
BELL
Serial Number
65-12853
Engine Type
Turbo-shaft
Year Built
1965
Model / ICAO
UH-1B UH1
Aircraft Type
Rotorcraft
No. of Engines
1

Registered Owner (Historical)

Name
SUMMIT SALES AND LEASING INC
Address
STATE RD 605 BOX 39
Status
Deregistered
City
CLOVERDALE
State / Zip Code
VA 24077
Country
United States

Analysis

On September 29, 1994, about 1840 central daylight time, a Bell UH-1B, N41870, collided with trees during a forced landing near Ozark, Alabama. The helicopter was operated by Summit Helicopters, Inc. under the provisions of 14 CFR Part 91, and visual flight rules. A flight plan was not filed for the positioning flight. There were no injuries to the commercial pilot, minor injuries to a passenger, and substantial damage to the aircraft. Origination of the flight was Brantley, Alabama, about 1615, on the same day.

The pilot reported that while in cruise flight, the engine chip light illuminated. About five seconds later it extinguished. Since the helicopter was about three miles from the Blackwell Airport, Ozark, Alabama, he elected to continue toward the airport. The chip light re-illuminated and the pilot began searching for a landing site in the heavily wooded terrain. About the same time, the low rotor speed warning horn sounded. An autorotation was established to an open field. The helicopter could not reach the field and collided with trees.

Metal debris was found in the accessory gearbox during a post accident, on-site inspection of the engine. Subsequently, a teardown and inspection of the engine was performed. The number one, three, and four bearings had failed because of a lack of lubrication.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# ATL94LA180