N200AW

Substantial
Fatal

AERO COMMANDER 200D S/N: 383

Accident Details

Date
Monday, January 2, 1995
NTSB Number
LAX95LA070
Location
LANCASTER, CA
Event ID
20001207X02880
Coordinates
34.719009, -118.479804
Aircraft Damage
Substantial
Highest Injury
Fatal
Fatalities
1
Serious Injuries
2
Minor Injuries
0
Uninjured
1
Total Aboard
4

Probable Cause and Findings

fuel starvation due to the pilot's failure to select a tank containing fuel.

Aircraft Information

Registration
N200AW
Make
AERO COMMANDER
Serial Number
383
Engine Type
Turbo-shaft
Year Built
1967
Model / ICAO
200D DH8B
Aircraft Type
Fixed Wing Multi Engine
No. of Engines
2

Registered Owner (Historical)

Name
WHITE DAVID L
Address
4040 KNOX AVE
Status
Deregistered
City
ROSAMOND
State / Zip Code
CA 93560
Country
United States

Analysis

On January 1, 1995, at 1710 Pacific standard time, an Aero Commander 200D, N200AW, collided with the ground during a forced landing attempt in a rural area of Lancaster, California. The forced landing was precipitated by a loss of engine power. Visual meteorological conditions prevailed at the time and no flight plan was filed for the operation. The aircraft incurred substantial damage. The pilot sustained serious injuries in the accident and died in a hospital on January 18, 1995. Two of the three passengers incurred minor injuries, while one passenger was not injured. The flight originated at Apple Valley, California, on the day of the accident at 1630 as a personal flight to Rosamond, California.

In an oral statement to responding Los Angeles County sheriff's deputies, the pilot said the engine quit and he was attempting a forced landing on a road when a car got in the way. The pilot then set up to land in a desert area adjacent to the road. The aircraft landed hard and sheared off the landing gear.

A Federal Aviation Administration (FAA) inspector from the Van Nuys Flight Standards District Office responded to the scene. He reported that the fuel selector valve was positioned to a right wing fuel tank which was found to be empty. The three remaining fuel tanks in the aircraft were full of fuel. The fuel pump functioned normally when activated with aircraft battery power, and the fuel selector was positioned to a tank containing fuel. No fuel was found in the fuel lines from the firewall to the fuel pump.

The engine was removed from the aircraft and sent to the Teledyne Continental factory, where it was installed in a test cell under the supervision of FAA inspectors. The engine started without hesitation and was exercised throughout its normal power range.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# LAX95LA070