N62EC

Substantial
None

CESSNA 185 S/N: 18504435

Accident Details

Date
Monday, April 24, 1995
NTSB Number
NYC95LA093
Location
BANGOR, ME
Event ID
20001207X03370
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

the pilot's improper flare, which resulted in a hard landing and collapse of the right main gear.

Aircraft Information

Registration
Make
CESSNA
Serial Number
18504435
Engine Type
Reciprocating
Year Built
1985
Model / ICAO
185 C185
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
6
FAA Model
A185F

Registered Owner (Current)

Name
SHARP AVIATION LLC
Address
1708 WEST AVE SOUTH
City
PAULS VALLEY
State / Zip Code
OK 73075
Country
United States

Analysis

On April 24, 1995, about 1655 eastern daylight time, a Cessna 185, N62EC, was substantially damaged during landing at Bangor Airport, Bangor, Maine. The pilot and passenger were not injured. Visual meteorological conditions prevailed, and no flight plan was filed for the personal flight operated under 14 CFR Part 91.According to the pilot, he was conducting a short field approach to runway 33. The pilot further stated, in the NTSB form 6120.1/2,

...On landing the aircraft ballooned slightly, followed by a normal 3 point landing. Upon rollout, taxiing to Kilo intersection, aircraft began turning slightly left. Pilot applied right rudder than right brake to correct. Without any indication the right main landing gear folded under aircraft. Aircraft continued turning striking the right wing tip....

In the Federal Aviation Administration Inspector's post accident examination report, he stated,

...During the investigation, it was calculated that the PIC [pilot in command], during a crosswind landing, had apparently lost control and laid the aircraft on a steep angle causing the right main wheel to tuck under the belly of the aircraft. This was evident by the scrap marks on the rim of the wheel halves. The impact and weight of the aircraft created an excessive side loading. This caused the right main spring steel gear to exert a tremendous upward pull on the single bolt securing the gear to the box beam. The bolt...had pulled through the...nut....

The winds reported at the time of the accident, were from 300 degrees at 10 knots.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# NYC95LA093