N704AA

Substantial
None

Cessna 150M S/N: 15078448

Accident Details

Date
Friday, August 8, 1997
NTSB Number
SEA97LA183
Location
STANLEY, ID
Event ID
20001208X08743
Coordinates
44.260009, -114.970909
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

The pilot's failure to attain rotation speed. The pilot's failure to maintain aircraft control and rough runway conditions were factors.

Aircraft Information

Registration
Make
CESSNA
Serial Number
15078448
Engine Type
4-cycle
Year Built
1976
Model / ICAO
150M C150
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
2
FAA Model
150M

Registered Owner (Current)

Name
WASATCH INDUSTRIES LLC
Address
3721 S 250 W STE 201
City
OGDEN
State / Zip Code
UT 84405-1541
Country
United States

Analysis

On August 8, 1997, at 1115 mountain daylight time, the pilot of a Cessna 150M, N704AA, operated by Mountain Home Aviation, as a 14 CFR Part 91 personal flight, collided with a barbed wire fence during takeoff from the Stanley Airport, Stanley, Idaho. Visual meteorological conditions prevailed at the time and a visual flight rules flight plan was filed. The airplane was substantially damaged and the private pilot, the sole occupant, was not injured. The flight was departing for Mountain Home, Idaho.

The pilot reported in a written statement that he had visually checked the wind direction and speed. During the preflight check, the pilot noted that the temperature was 75 degrees and he checked the Cessna Pilots Operating Handbook Performance Section for the takeoff distance. The pilot calculated that for the pressure altitude, temperature, runway condition and wind speed, that it would take approximately 3,036 feet of ground roll to clear a 50 foot obstacle. The airport length at Stanley is 4,300 feet.

The pilot stated that just prior to commencing the takeoff ground roll, he reviewed the soft field takeoff procedures and elected to use the soft field technique for takeoff because of the rough runway condition. The pilot stated that when he rotated the airplane for liftoff, the airplane failed to continue to gain altitude and settled back to the runway. The pilot reported that this occurred twice. The pilot stated that as he was attempting to maintain control of the airplane, it was blown off the runway to the east and subsequently collided with a barbed wire fence.

The pilot reported that there were no mechanical failures or malfunctions with the airplane at the time of the accident.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# SEA97LA183