N9204D

Substantial
None

Boeing MD600N S/N: RN004

Accident Details

Date
Tuesday, February 3, 1998
NTSB Number
LAX98LA093
Location
MESA, AZ
Event ID
20001211X09574
Coordinates
33.509574, -111.579498
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

the attempt by flight test engineers to verify a height/velocity data point that was subsequently shown to be outside the aircraft's performance capabilities.

Aircraft Information

Registration
N9204D
Make
BOEING
Serial Number
RN004
Engine Type
Turbo-jet
Year Built
1996
Model / ICAO
MD600N B736
Aircraft Type
Fixed Wing Multi Engine
No. of Engines
2

Registered Owner (Historical)

Name
MCDONNELL DOUGLAS HELICOPTER CO
Address
5000 E MCDOWELL ROAD
Status
Deregistered
City
MESA
State / Zip Code
AZ 85205
Country
United States

Analysis

On February 3, 1998, at 0935 hours mountain standard time, a Boeing MD600N, N9204D, experienced a hard landing while performing an autorotative landing at Falcon Field, Mesa, Arizona. The aircraft sustained substantial damage; however, the pilot, the sole occupant, was not injured. The aircraft was being operated as a test flight by Boeing Mesa when the accident occurred. The flight originated in Mesa at 0736 on the morning of the accident. Visual meteorological conditions prevailed at the time and no flight plan was filed.

At the time of the accident, the pilot was in the process of verifying a theoretical height/velocity performance data point. He had entered an autorotation at 14 feet agl and 30 knots airspeed while at takeoff power, and a gross weight of 4,100 pounds. The planned entry point was 10 feet agl and 20 knots airspeed. The onboard telemetry verified that the pilot had reduced the throttle to flight idle at the entry point. After the throttle reduction, however, the remaining momentum allowed the aircraft to accelerate to 30 knots and climb an additional 23 feet agl. During the subsequent descent, the main rotor rpm decayed and an excessive vertical sink rate developed. The aircraft landed hard at the intended touchdown point, while in a near level attitude. The aircraft was hover-taxied from the landing area and a normal shutdown was completed.

A postaccident inspection of the aircraft revealed the airframe and landing gear exhibited bending, cracking, and tearing from fuselage station (FS) 78.5 to FS44.65. The bulkhead at FS124 and the engine door frame at FS137.5 were buckled and cracked on both the left and right sides. The cockpit seat pan support structures were buckled. The right and left landing gear struts were also bent and displaced.

The test pilot reported that the height/velocity data point attempted was shown to be outside the aircraft's performance capabilities.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# LAX98LA093