Accident Details
Probable Cause and Findings
The pilot's delay in initiating a go-around, which resulted in an inflight collision with power lines.
Aircraft Information
Registered Owner (Historical)
Analysis
On June 29, 1998, about 1745 eastern daylight time, a Cessna 152, N6363B, registered to a private individual, operating as a Title 14 CFR Part 91 personal flight, impacted with wires near Columbia, South Carolina. Visual meteorological conditions prevailed, and no flight plan was filed. The airplane was substantially damaged. The private pilot and one passenger reported no injures. The flight had originated from the Columbia Owens Downtown Airport about 1630.
On his second approach to runway 31, the pilot said, "...[he] came in too high, [and] dropped 30 degrees of flaps to lose altitude...I was not maintaining directional control as well as I would like, so began another go-around." He added full power, pushed in the carburetor heat and "waited for [the] airspeed to build up before retracting [the] flaps...[the] airspeed did not build up." As the airplane reached the end of the 4,999-foot runway, it cleared a fence, and the pilot said he then "saw a power line dead ahead." He "pulled up" to clear the power lines. The landing gear caught the power line, and the right wing struck the pole. The airplane "spun around" and nosed into the top of a building where it came to rest. The airplane was seen by witnesses at a slow speed before it struck the power line and impacted the building. Nobody on the ground was injured. No discrepancies were found with either the airframe or the engine.
At the time of the accident the pilot had a total of 81 flight hours, with 79.6 flight hours in this make and model airplane.
Data Source
Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# MIA98LA191