N265KK

Substantial
None

Koster MURPHY REBEL S/N: 265

Accident Details

Date
Saturday, June 27, 1998
NTSB Number
SEA98LA111
Location
ARLINGTON, WA
Event ID
20001211X10436
Coordinates
48.179103, -121.669441
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
1
Total Aboard
1

Probable Cause and Findings

The pilot/builder's attachment inadequate installation of the aileron control pushrods to the control stick assembly, resulting in the ailerons deflecting in a direction opposite of the input applied by the pilot. Also causal was the pilot's inadequate preflight inspection which failed to detect the improper operation of the aileron control.

Aircraft Information

Registration
N265KK
Make
KOSTER
Serial Number
265
Engine Type
Reciprocating
Year Built
1997
Model / ICAO
MURPHY REBEL BPAT
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1

Registered Owner (Historical)

Name
KOSTER KEN
Address
4080 LEIGH LANE
SO LEIGH CANYON WY
Status
Deregistered
City
TETONIA
State / Zip Code
ID 83452
Country
United States

Analysis

On June 27, 1998, approximately 1300 Pacific daylight time, an experimental Koster Murphy Rebel, N265KK, impacted the terrain during the initial climb after takeoff from Arlington Municipal Airport, Arlington, Washington. The airline transport pilot, who was the sole occupant, was not injured, but the aircraft, which had been built and was owned by the pilot, sustained substantial damage. The 14 CFR Part 91 local pleasure flight was being operated in visual meteorological conditions. No flight plan had been filed, and the ELT, which was activated by the impact, was turned off at the scene.

According to the pilot, this was the first flight of the aircraft after completion of its construction. He said that just after liftoff, the aircraft started to roll to the right, so he applied slight left aileron as a correction. Instead of the aircraft rolling back toward the left, as the pilot expected, it rolled even further to the right. The pilot then cut the power and attempted to land while holding a significant amount of left aileron and full left rudder. As the aircraft slowed, it rolled left, the nose dropped, and soon thereafter, the aircraft impacted the runway surface.

A post-accident inspection of the aircraft revealed that the builder/pilot had rigged the ailerons backwards during construction (attached pushrods to the wrong control stick assembly holes), so that moving the stick to the left would cause the aircraft to roll to the right. Also, during a post-accident interview, the pilot stated that he had done a hurried pre-flight that day because someone had changed the lock on the hanger where his aircraft was housed, and that had put him a couple of hours behind schedule.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# SEA98LA111