N3654C

Substantial
None

CESSNA 180 S/N: 31152

Accident Details

Date
Sunday, August 8, 1993
NTSB Number
ANC93LA138
Location
ANCHORAGE, AK
Event ID
20001211X13028
Coordinates
61.160877, -149.989990
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
3
Total Aboard
3

Probable Cause and Findings

THE INADVERTENT RAISING OF THE FLAPS.

Aircraft Information

Registration
Make
CESSNA
Serial Number
31152
Engine Type
Reciprocating
Year Built
1954
Model / ICAO
180 C180
Aircraft Type
Fixed Wing Single Engine
No. of Engines
1
Seats
4
FAA Model
180

Registered Owner (Current)

Name
ROSE HUGH S
Address
620 YAK RD
City
FAIRBANKS
State / Zip Code
AK 99709-2407
Country
United States

Analysis

On August 7, 1993, at 2215 Alaska daylight time, a wheel equipped Cessna 180 airplane, N3654C, registered to Tony Turinsky of Anchorage, Alaska, and operated by the Pilot-in-Command, landed short of the Lake Hood Airstrip, Anchorage, Alaska. The personal flight, operating under 14 CFR Part 91, departed Lake Hood for a local flight. No flight plan was filed and visual meteorological conditions prevailed. The Commercial Certificated Pilot-in- Command and the two passengers were not injured and the airplane was substantially damaged.

According to the Pilot-in-Command, he was on short final, landing to the south, when the airplane suddenly fell out of the sky. It landed short of the runway. After exiting the airplane, he noticed the flap handle set at the 30 degree flap position. He stated he had selected the 40 degree position during the approach.

Examination of the airplane and flap handle by a NTSB Investigator showed that when the 40 degree flap position was selected initially, the handle would stay in position. However, when the handle was lightly bumped it immediately jumped back to the 30 degree flap position. The test was performed a number of times with the same results. Occasionally, the handle would remain in the flaps 40 degree position but only after pulling up against the stop a number of times. The flap handle travel from the 30 degree to 40 degree position was stiff and as the handle neared the 40 degree position it became harder to pull and required effort to ensure that it would latch in the flaps 40 degree position.

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# ANC93LA138