N8196Y

Substantial
None

Piper PA-30S/N: 30-1314

Accident Details

Date
Tuesday, February 27, 2001
NTSB Number
CHI01LA096
Location
Appleton, WI
Event ID
20010302X00533
Coordinates
44.279457, -88.380432
Aircraft Damage
Substantial
Highest Injury
None
Fatalities
0
Serious Injuries
0
Minor Injuries
0
Uninjured
2
Total Aboard
2

Probable Cause and Findings

The misjudged glidepath and the intentional engine shutdown by the pilot. Factors were the false indication of the landing gear down light and the approach light.

Aircraft Information

Registration
N8196Y
Make
PIPER
Serial Number
30-1314
Engine Type
Reciprocating
Year Built
1966
Model / ICAO
PA-30PA30
Aircraft Type
Fixed Wing Multi Engine
No. of Engines
2

Registered Owner (Historical)

Name
HARTZ JAY M
Address
1146 COUNTY RD N
Status
Deregistered
City
NESHKORO
State / Zip Code
WI 54960
Country
United States

Analysis

On February 27, 2001, at 1701 central standard time, a Piper PA-30, N8196Y, piloted by a private pilot, was substantially damaged during a precautionary landing, to runway 29 (6,501 feet by 150 feet, concrete), at the Outagamie County Regional Airport, Appleton, Wisconsin. The aircraft undershot the runway striking a runway approach light and came to rest about 10 feet from the approach end of the runway. The flight was conducted under 14 CFR Part 91 and was not on a flight plan. Visual meteorological conditions prevailed. The pilot and pilot rated passenger were not injured. The local flight originated at 1630.

In a written statement, the pilot stated that the flight was conducted to practice instrument approaches. He said that on one of the approaches, the green landing gear down indicator light did not illuminate. He said that he attempted to troubleshoot the problem but could not get a gear down indication. He said that he performed the emergency gear extension procedures and opened the gear actuator panel, located in the cockpit floor, and the actuator mechanism appeared to be "properly positioned." He said that he decided to land and, when on short final, he "cut the engines in order to minimize propeller/engine damage in the event of gear collapse." He said that. "the aircraft mushed in shortly after that, contacting the ground in a level attitude." He stated that , "factors leading to this outcome were: The approach was flown down the glideslope at 3 degree slope, which left insufficient altitude for a dead stick landing; there were moderate headwinds; the aircraft had full fuel and a 200# safety pilot on board, whereas I usually fly alone; half flaps were used to reduce stalling speed and consequent damage in the event of a gear collapse, thus increasing drag over what it is with my normal routine to land without flaps; in retrospect, I cut the power too soon."

Data Source

Data provided by the National Transportation Safety Board (NTSB). For more information on this event, visit the NTSB Records Search website. NTSB# CHI01LA096